Hi everyone, I have a 600C running 504. I have it set up this way;
VDOMs: PrimaryWAN (Transparent) root (NAT) VLAN2 (Transparent) VLAN3
(Transparent) If I create VDOM-Links for any of those to any others in
the GUI, it adds ' set macaddr' parameters ...
Hi everyone, This is one a 600C, using 4.0MR3p14 Is it possible to
create a soft-switch in a transparent mode VDOM? We have a single
inbound internet feed that gives us two /29 IP blocks, with VLAN Tags
for each (2 and 3). I have 10 internet facing m...
hi guys and gals. Is it possible to combine the wlan and interface1
interfaces into a soft-switch style mode, while the fortiwifi (60c) is
in interface mode? I know how to do it while it is in switch mode, but
we have a need to have separate, dedicat...
Hi everyone, Does anyone know how to query against a managed set of
Fortinets for specific settings? For instance, I would like to query and
see which of my fortinets have a specific admin account programmed into
them. Can that be done? I have a Fort...
Well, it wouldn't hurt your firewall or theirs to simply try 3DES - MD5,
and then just clicking through a few random variations. If you hit the
right combination you will have it up all weekend.
That's great that that works for you, but we are seeing;no response on
the LAN sideno response at the console EDIT: Misread. But have the exact
same config across all our devices, and only a subset are experiencing
this.
Very much agree, its not just you, and its late model C, various model
D. Of course, they also always want a HQIP test first, even though the
boot console capture is pretty much stating the obvious. We are
convinced they switched flash provider for b...
It should be noted that we have over 300 60Cs and 60Ds, and are only
seeing this on ~40 or so. We are trying to collect up Gens, BIOS, wifi
controller info, etc., to see if there is a similarity somewhere.
5.2.7 on 60Cs and 60Ds does not solve it. Only disabling the wifi NIC
and adding a FAP does. We have attempted to work with TAC starting with
5.2.1, and every time the answer becomes "try the new firmware" Once
they said 'try 5.4.0' that was enough. ...