Hi. I have a unique issue with a client. They want for normal days
(First part)1 ISP that is used for upload only (Wan1) 1 ISP that is used
for download only (Wan2) Best method to set this up? Then, on streaming
days they want to switch it to (second...
Hi. I have a 90D and 2 x 221C WAPs. I put this in " local bridge" so
that the wired and wireless could be on the same subnet. Ever since I
did this the wireless to a certain IP (outside) is slow. Wired is not
slow at all. All UTM is disabled currentl...
Hi. One of our 80Cs failed, and we were given an 80CM as a replacement.
I tried to restore our config from the backup but it says it is not
compatible. They both have the exact same build on them. Does anyone
know the changes I would need to make in ...
Hi all. First, thank you for your help. Second, here is my issue. Office
A. 192.168.1.0/24 (put in prior to me...which they didn' t use that
address). Office B. 192.168.2.0/24 There is an interface IPSec tunnel
between the two, and it works great. SS...
Hi. I have a Fortigate 80C and a FAP21B. I have two SSIDs. One is
WPA/WPA2, and works great. The other is a captive portal that we use for
visitors. We have found that the time out if idle is extremely quick,
and kicks them off so they have to reente...
hmm, I see where you are going. All users, but I believe they upload
strictly through Box over HTTPS. They are a media production company, so
they have very large files.
Yes, my guess is I would have to change the the weight to 100 and 0 for
the other devices so they essentially use WAN2 only. We shall see what
the client thinks. Before they had WAN2 I had traffic shaping for the
streaming devices for guaranteed band...
Understood. I couldn't figure out a way to say if it was upload or
download from the client side, and wanted to make sure I wasn't missing
anything. They are simply doing two wan interfaces that are NATed. NO
BGP. I think just enabling SD-WAN for the...
