FortiGate-200B (14:40-09.14.2010)
Ver:04000007
Serial number:FG200BXXXXXXXXXX
RAM activation
Total RAM: 1024MB
Enabling cache...Done.
Scanning PCI bus...Done.
Allocating PCI resources...Done.
Enabling PCI resources...Done.
Zeroing IRQ settings...Done.
Verifying PIRQ tables...Done.
Disabling local APIC...Done.
Boot up, boot device capacity: 3824MB.
Press any key to display configuration menu...
.
[G]:  Get firmware image from TFTP server.
[F]:  Format boot device.
[B]:  Boot with backup firmware and set as default.
[I]:  Configuration and information.
[Q]:  Quit menu and continue to boot with default firmware.
[H]:  Display this list of options.

Enter Selection [G]:

Enter G,F,B,I,Q,or H:

All data will be erased,continue:[Y/N]?
Formatting boot device...
..............................................................
Format boot device completed.

Enter G,F,B,I,Q,or H:

Please connect TFTP server to Ethernet port "1".

Enter TFTP server address [192.168.1.168]: 
Enter local address [192.168.1.188]: 
Enter firmware image file name [image.out]: 
MAC:00090FXXXXXX
#####################
Total 22510029 bytes data downloaded.
Verifying the integrity of the firmware image.

Total 65536kB unzipped.
Save as Default firmware/Backup firmware/Run image without saving:[D/B/R]?D
Programming the boot device now.
................................................................../src/device/usb2/usb.c: 342: usb_start_wait_urb status!=0(-32)

ERROR: Bulk read CSW ret = -32
ERROR: ll_read_block( 5e08, 38c10000, e081, 10) = -1
../src/device/usb2/usb.c: 342: usb_start_wait_urb status!=0(-32)

ERROR:Bulk read data ret = -32
../src/device/usb2/usb.c: 342: usb_start_wait_urb status!=0(-32)

ERROR: Bulk read CSW ret = -32
ERROR: ll_read_block( 5e08, 38c12000, e091, 10) = -1
FortiGate-200B (14:40-09.14.2010)
Ver:04000007
Serial number:FG200BXXXXXXXXXX
RAM activation
Total RAM: 1024MB
Enabling cache...Done.
Scanning PCI bus...Done.
Allocating PCI resources...Done.
Enabling PCI resources...Done.
Zeroing IRQ settings...Done.
Verifying PIRQ tables...Done.
Disabling local APIC...Done.
Boot up, boot device capacity: 3824MB.
Press any key to display configuration menu...
.
[G]:  Get firmware image from TFTP server.
[F]:  Format boot device.
[B]:  Boot with backup firmware and set as default.
[I]:  Configuration and information.
[Q]:  Quit menu and continue to boot with default firmware.
[H]:  Display this list of options.

Enter Selection [G]:

Enter G,F,B,I,Q,or H:

Enter G,F,B,I,Q,or H:

All data will be erased,continue:[Y/N]?
Formatting boot device...
..............................................................
Format boot device completed.

Enter G,F,B,I,Q,or H:

Please connect TFTP server to Ethernet port "1".

Enter TFTP server address [192.168.1.168]: 
Enter local address [192.168.1.188]: 
Enter firmware image file name [image.out]: 
MAC:00090FXXXXXX
#####################
Total 22510029 bytes data downloaded.
Verifying the integrity of the firmware image.

Total 65536kB unzipped.
Save as Default firmware/Backup firmware/Run image without saving:[D/B/R]?R
................................................................
Reading boot image 1331001 bytes.
Initializing firewall...
System is started.
Using default data disk.
Unable to read mbr /dev/hda
Using default data disk.
Formating shared data partition ... Using default data disk.
failed, status=256!
Cannot mount shared data partition.
Using default data disk.
[fs.c:671] Read from MBR of boot device '/dev/hda' failed.
Using default data disk.
Using default data disk.
Using default data disk.
fgtag.c - 139: Failed to open device: /dev/hda
Using default data disk.
Using default data disk.
Using default data disk.
Abort booting!
unknown operation mode(0)


The system is going down NOW !!

Please stand by while rebooting the system.
FortiGate-200B (14:40-09.14.2010)
Ver:04000007
Serial number:FG200BXXXXXXXXXX
RAM activation
Total RAM: 1024MB
Enabling cache...Done.
Scanning PCI bus...Done.
Allocating PCI resources...Done.
Enabling PCI resources...Done.
Zeroing IRQ settings...Done.
Verifying PIRQ tables...Done.
Disabling local APIC...Done.
Boot up, boot device capacity: 3824MB.
Press any key to display configuration menu...
......
Open boot device failed.