Hot!Monitor physical interfaces of FTG cluster with SNMP

Author
fred2019
New Member
  • Total Posts : 4
  • Scores: 0
  • Reward points: 0
  • Joined: 2019/05/20 10:59:25
  • Status: offline
2021/10/12 10:56:35 (permalink)
0

Monitor physical interfaces of FTG cluster with SNMP

Hello,
I'm trying to detect when physical interfaces get down on a cluster (Active / Passive) with snmp get.
I can see physical interfaces descr at oid iso.3.6.1.2.1.31.1.1.1 and iso.3.6.1.2.1.47.1.1.1.1.7 but I can't find the ifOperStatus.
It doesn't seems to be a IF-MIB.
I think iso.3.6.1.2.1.47.1.1.1.1. refers to the active FTG. So I could use IF-MIB oid to get the interface status of the active member.
How to get the status of Passive member physical interfaces?
 
Thanks
#1

2 Replies Related Threads

    ede_pfau
    Expert Member
    • Total Posts : 6513
    • Scores: 565
    • Reward points: 0
    • Joined: 2004/03/09 01:20:18
    • Location: Heidelberg, Germany
    • Status: offline
    Re: Monitor physical interfaces of FTG cluster with SNMP 2021/10/13 08:10:22 (permalink)
    0
    You get the values from the slave unit by appending the serial number to the SNMP community:
    instead of
    "public"
    you use
    "public-FGT200ETK1234567"
     
    The master unit will then forward the request to the slave unit and communicate it back.
    Source: https://kb.fortinet.com/k...nt.do?externalId=13077

    Ede

    " Kernel panic: Aiee, killing interrupt handler!"
    #2
    fred2019
    New Member
    • Total Posts : 4
    • Scores: 0
    • Reward points: 0
    • Joined: 2019/05/20 10:59:25
    • Status: offline
    Re: Monitor physical interfaces of FTG cluster with SNMP 2021/10/14 05:32:14 (permalink)
    0
    Hello,
     
    Thanks for the answer. But I'm must use snmp v3. So I can't use the community.
     
    Fortigate 500D and 1200. Version 5.6.x
    #3
    Jump to:
    © 2021 APG vNext Commercial Version 5.5