FortiAP 431F: CPU and memory usage monitoring using SNMP

New Member
  • Total Posts : 1
  • Scores: 0
  • Reward points: 0
  • Joined: 2021/07/13 02:28:04
  • Status: offline
2021/07/13 02:45:18 (permalink)

FortiAP 431F: CPU and memory usage monitoring using SNMP

I'm trying to graph the CPU and memory usage of the FortiAP 431F. (managed by FortiGate). I checked the MIB that is downloadable over Support page (i.e. FORTINET-CORE-MIB, FORTINET-FORTIAP-MIB) but it does not contain CPU and memory OID. Any pointers/assistance is greatly appreciated.

1 Reply Related Threads

    New Member
    • Total Posts : 3
    • Scores: 0
    • Reward points: 0
    • Joined: 2015/05/30 11:40:28
    • Status: offline
    Re: FortiAP 431F: CPU and memory usage monitoring using SNMP 2021/07/21 19:46:35 (permalink)
    Hi - i'm using snmp to monitor FortiAPs managed by FGTs (mostly FGT300E 6.0.12).
    I use FORTINET-FORTIGATE-MIB and I think there are paths you are looking for:
    OID: (or 21 for memory)
    This is a column OID so to get value for one AP (WTP) you must add ID of that AP to the OID above.
    Default ID of AP is its serial number - it must be written as TypeLenValue format (type in this case is string - code 1).
    For example: WTPID of AP with serial number: "FP221ETF19906655" is:
    1 = typecode of value WTPID (1 = string)
    16 = len of value WTPID = len of string "FP221ETF19906655" = string "FP221ETF19906655" as ASCII codes (decimal) ("F"=70,"P"=80,"2"=50 etc).

    if you want to get cpu usage for AP with serial number, for example: FP221ETF19906655 you should query Fortigate for value of this OID:
    and for memory usage:


    Jump to:
    © 2021 APG vNext Commercial Version 5.5