Helpful ReplyHot!VLAN on an SSID

Author
BryEarthComm
New Member
  • Total Posts : 9
  • Scores: 0
  • Reward points: 0
  • Joined: 2021/06/24 08:00:22
  • Location: Fort Nelson, BC
  • Status: offline
2021/06/24 08:54:21 (permalink)
0

VLAN on an SSID

I added a VLAN to an SSID and relaized it was in error, as i attempted to remove the VLAN from the SSID its returns and error "Input not as expected". I have removed any policies, addresses and interfaces using the vlan, with the same result.
 
Any help to find other reference points i may not have thought of would be a great help to remove this, thank you.
 
-Bry
#1
Toshi Esumi
Expert Member
  • Total Posts : 2634
  • Scores: 257
  • Reward points: 0
  • Joined: 2014/11/06 09:56:42
  • Status: offline
Re: VLAN on an SSID 2021/06/24 09:14:05 (permalink)
0
GUI or CLI?
#2
BryEarthComm
New Member
  • Total Posts : 9
  • Scores: 0
  • Reward points: 0
  • Joined: 2021/06/24 08:00:22
  • Location: Fort Nelson, BC
  • Status: offline
Re: VLAN on an SSID 2021/06/24 09:15:13 (permalink)
0
either is fine, but I've been using GUI
#3
Toshi Esumi
Expert Member
  • Total Posts : 2634
  • Scores: 257
  • Reward points: 0
  • Joined: 2014/11/06 09:56:42
  • Status: offline
Re: VLAN on an SSID 2021/06/24 09:56:30 (permalink)
0
With my 6.2.7 FGT in GUI, I see "Optional VLAN ID" box only with bridge mode SSID and I could add and remove it without any error. Is it where you have the VLAN?
#4
BryEarthComm
New Member
  • Total Posts : 9
  • Scores: 0
  • Reward points: 0
  • Joined: 2021/06/24 08:00:22
  • Location: Fort Nelson, BC
  • Status: offline
Re: VLAN on an SSID 2021/06/24 10:00:33 (permalink)
0
The option is unable to be altered

Attached Image(s)

#5
Toshi Esumi
Expert Member
  • Total Posts : 2634
  • Scores: 257
  • Reward points: 0
  • Joined: 2014/11/06 09:56:42
  • Status: offline
Re: VLAN on an SSID 2021/06/24 10:05:47 (permalink)
0
That's not SSID config, but an existing VLAN interface config. Did you remove SSID first?
#6
BryEarthComm
New Member
  • Total Posts : 9
  • Scores: 0
  • Reward points: 0
  • Joined: 2021/06/24 08:00:22
  • Location: Fort Nelson, BC
  • Status: offline
Re: VLAN on an SSID 2021/06/24 10:35:51 (permalink)
0
I am unable to remove the SSID even though there is no references to it.

Attached Image(s)

#7
Toshi Esumi
Expert Member
  • Total Posts : 2634
  • Scores: 257
  • Reward points: 0
  • Joined: 2014/11/06 09:56:42
  • Status: offline
Re: VLAN on an SSID 2021/06/24 11:05:19 (permalink)
0
You have a VLAN subinterface QVnet.83 configured on QVnet tunnel mode SSID. So you have to remove QVnet.83 vlan first. I thought it was opposite. Can you simply remove the QVnet.83 interface?
#8
BryEarthComm
New Member
  • Total Posts : 9
  • Scores: 0
  • Reward points: 0
  • Joined: 2021/06/24 08:00:22
  • Location: Fort Nelson, BC
  • Status: offline
Re: VLAN on an SSID 2021/06/24 11:16:19 (permalink)
0
Same result, after attempting to delete the host SSID to the vlan and deleting the vlan both result in the same error
 

Attached Image(s)

#9
BryEarthComm
New Member
  • Total Posts : 9
  • Scores: 0
  • Reward points: 0
  • Joined: 2021/06/24 08:00:22
  • Location: Fort Nelson, BC
  • Status: offline
Re: VLAN on an SSID 2021/06/24 11:18:22 (permalink)
0
# delete QVnet.83 
Can not delete a static table entry
Command fail. Return code -61
#10
Toshi Esumi
Expert Member
  • Total Posts : 2634
  • Scores: 257
  • Reward points: 0
  • Joined: 2014/11/06 09:56:42
  • Status: offline
Re: VLAN on an SSID 2021/06/24 11:38:10 (permalink) ☄ Helpfulby BryEarthComm 2021/06/24 13:06:18
0
That CLI error message generally shows up when you try to remove a system default profile or something similar, which doesn't make sense for a VLAN you created. You might need to open a ticket at TAC if a reboot wouldn't change the outcome.
#11
BryEarthComm
New Member
  • Total Posts : 9
  • Scores: 0
  • Reward points: 0
  • Joined: 2021/06/24 08:00:22
  • Location: Fort Nelson, BC
  • Status: offline
Re: VLAN on an SSID 2021/06/24 13:14:39 (permalink)
0
I was running 6.2.2, updated firmware to 6.2.4 and immediately was able to remove the VLAN and SSID
#12
lobstercreed
Expert Member
  • Total Posts : 433
  • Scores: 53
  • Reward points: 0
  • Joined: 2018/11/28 14:57:58
  • Location: Sedalia, MO
  • Status: offline
Re: VLAN on an SSID 2021/06/28 06:36:34 (permalink) ☄ Helpfulby BryEarthComm 2021/06/28 13:01:12
0
As a general rule of thumb, you want to be on later versions than .2 in a release train.  .0 is no, .1 is no with sprinkles, and .2 is maybe only if it's been thoroughly tested (as you found, still buggy). 
 
When 6.2 is now all the way to .9 I would recommend running something later as far more bugs are likely to be fixed.   FWIW, 6.4 seems to be a better release train for most folks, and I've been running it for a year now.
#13
Jump to:
© 2021 APG vNext Commercial Version 5.5