Hot!Traffic shaping

Author
sims
Gold Member
  • Total Posts : 168
  • Scores: -4
  • Reward points: 0
  • Joined: 2014/06/09 03:26:11
  • Status: offline
2021/06/11 19:26:35 (permalink)
0

Traffic shaping

Hi,
 
I have the attached topology. Traffic shaping is enabled on FG. 
from two isp I have 300 Mbps traffic, ISP A( 200) and B (100 )
Let's say I want to assign 200 Mbps for 10.0.0.0/8 through ISP-A  and 192.168.2.0/24 to ISP B.
How can I do this? 
I created two traffic shapers, ISP-A -200Mbps, and   ISP-B 100Mbps.
Created two policies as below 
policy (1)for 10.0.0.0/8 
policy (2) for  192.168.2.0/24.
Does it work as expected?  
 
Thanks 
 

Attached Image(s)

#1

3 Replies Related Threads

    lobstercreed
    Expert Member
    • Total Posts : 433
    • Scores: 53
    • Reward points: 0
    • Joined: 2018/11/28 14:57:58
    • Location: Sedalia, MO
    • Status: offline
    Re: Traffic shaping 2021/06/12 11:00:22 (permalink)
    0
    From what you're describing, I see no actual traffic shaping intended.  Instead, you want to use SD-WAN to do policy routing via ISP A or ISP B.
     
    The only reason you'd need shaping is if you wanted to allow 192.168.2.0/24 to go out via ISP A (for example if B was down) but be limited to 100Mbps, leaving 100Mbps for 10.0.0.0/8 on ISP A.
    #2
    sims
    Gold Member
    • Total Posts : 168
    • Scores: -4
    • Reward points: 0
    • Joined: 2014/06/09 03:26:11
    • Status: offline
    Re: Traffic shaping 2021/06/12 23:27:41 (permalink)
    0
    Hi ,
    Thank you for your reply . I have the load balancer  ( sw in the diagram, Actually I forgot to mark it in the diagram .sorry for that ) after  fortigate firewall 
     
    Thanks
    #3
    sims
    Gold Member
    • Total Posts : 168
    • Scores: -4
    • Reward points: 0
    • Joined: 2014/06/09 03:26:11
    • Status: offline
    Re: Traffic shaping 2021/06/14 00:29:49 (permalink)
    0
     
    Hi,
    And also I  want  do traffic shaping   like 10.0.1.0 /24 20 Mbps and 10.0.2.0/24 like this 
    Thanks
     
    #4
    Jump to:
    © 2021 APG vNext Commercial Version 5.5