Hot!Public IP addresses on the LAN Ports

Author
mdarnell@comtelhi.com
New Member
  • Total Posts : 1
  • Scores: 0
  • Reward points: 0
  • Joined: 2021/06/11 14:27:17
  • Status: offline
2021/06/11 14:41:42 (permalink)
0

Public IP addresses on the LAN Ports

We are getting a new connection and were given these instructions:
 
Customer Assigned IP: 205.172.X.X/30
DRF Gateway 205.172.X.X
Customer LAN IPs: 208.111.X.X/28 - 13 Usable IPs: 208.111.X.X  to  208.111.X.X
 
Can you do this with a 60E, have public IPs on the LAN ports?  The devices on the LAN side of the router will have the public IPs 208.111.X.X
 
Thanks
 
 
 

#1

1 Reply Related Threads

    ede_pfau
    Expert Member
    • Total Posts : 6487
    • Scores: 561
    • Reward points: 0
    • Joined: 2004/03/09 01:20:18
    • Location: Heidelberg, Germany
    • Status: offline
    Re: Public IP addresses on the LAN Ports 2021/06/12 03:22:33 (permalink)
    0
    Hello,
     
    and welcome to the forums.
    Yes, you can use ANY address space on ANY port of a FGT - except for some models with a "mgmt" port. Reason for the latter is that the "mgmt" interface will not be included in routing.
    The printed labels on a FGT are just suggestions for the most common use.

    Ede

    " Kernel panic: Aiee, killing interrupt handler!"
    #2
    Jump to:
    © 2021 APG vNext Commercial Version 5.5