Unconfigured vlans in hardware switch

Author
garci66
New Member
  • Total Posts : 1
  • Scores: 0
  • Reward points: 0
  • Joined: 2021/06/08 16:05:08
  • Status: offline
2021/06/08 16:13:41 (permalink)
0

Unconfigured vlans in hardware switch

Hi Everyone, 
 
I have a a FG-60F and have been using the hardware switch configuration with multiple ports configured in the switch (in my case, im actually using ports A,B,5 and 4)
 
I have around 10 vlan interfaces configured under the hw switch and those work perfectly
 
But since I have switches with their trunk ports on ports A and B and was wondering if unconfigured vlans on the fortigate would pass transparently
 
(for example, I have vlans 100,101 and 102 configured on the hw-switch as sub-interfaces). But for example, would vlan 200 be able to pass between the switches on ports A and B if the FG's config doesnt mention vlan 200 at all?
 
It seems to be working at the moment, but im not 100% sure if its expected or should I create a dummy interface with vlan 200 just to be safe. 
 
Finally, I guess there is no "pvid" like concept for the individual interfaces under a hardware switch, isnt it? (would let me have interfaces whose untagged packets would be assigned a specific vlan instead of vlan 0 / untagged.
 
thanks!!
#1

0 Replies Related Threads

    Jump to:
    © 2021 APG vNext Commercial Version 5.5