Hot!Forwarding external HTTPS to internal TCP-8443 not working

Author
Deep Banerji
New Member
  • Total Posts : 7
  • Scores: 0
  • Reward points: 0
  • Joined: 2020/11/05 08:38:58
  • Status: offline
2021/05/07 05:43:06 (permalink)
0

Forwarding external HTTPS to internal TCP-8443 not working

I have a 100E device. On my public interface I'm receiving HTTPS request which I'm virtually mapping to port TCP-8443 of an internal server but it is not working. I have allowed this policy too. Please help.
virtual IP a.b.c.d --> 10.14.50.81 (TCP: 443 --> 8443)
a.b.c.d is not the public interface IP
Any --> <virtual destination> service TCP-8443 is allowed
#1

2 Replies Related Threads

    BK_LGW
    Bronze Member
    • Total Posts : 21
    • Scores: 0
    • Reward points: 0
    • Joined: 2019/06/14 10:39:09
    • Status: offline
    Re: Forwarding external HTTPS to internal TCP-8443 not working 2021/06/04 23:29:52 (permalink)
    0
    Well do you have SSL VPN enabled? that may be using 443 on the interface with your public IP.
    #2
    emnoc
    Expert Member
    • Total Posts : 6137
    • Scores: 422
    • Reward points: 0
    • Joined: 2008/03/20 13:30:33
    • Location: AUSTIN TX AREA
    • Status: offline
    Re: Forwarding external HTTPS to internal TCP-8443 not working 2021/06/05 13:57:10 (permalink)
    0
    Run diag debug flow and investigate the output.
     
     
    e.g
    #cli 
    diag debug reset 
    diag debug enable
    diag debug flow filter port 8443
    diag debug flow trace start 20
     
    put some traffic up and grab the output.
     
    When done
     
    diag debug reset 
    diag debug disable
     
    Ken Felix

    PCNSE 
    NSE 
    StrongSwan  
    #3
    Jump to:
    © 2021 APG vNext Commercial Version 5.5