Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
BensonLEI
Contributor

problem in "management-ip in physical mgmt interface"

Hi, guys,

 

I got a problem for "set management-ip" in physical mgmt interface, my configurations in Forti600e HA-pair.

 

 

Problem 1 ( with FortiOS v6.4.4; can not get mac add of the gateway ) :

======================================================

 

Forti600E_03 # show sys ha config system ha set group-id 17 set group-name "HA" set mode a-a set hbdev "ha" 301 "port1" 100 set override disable set priority 200 end

Forti600E_03 # sh sys int mgmt config system interface edit "mgmt" set vdom "root" set management-ip 10.101.1.39 255.255.255.0 set ip 10.101.1.40 255.255.255.0 set allowaccess ping https ssh snmp fgfm ftm set type physical set device-identification enable set snmp-index 2 next end

 

 

Forti600E_03 # exe ping 10.101.1.39 PING 10.101.1.39 (10.101.1.39): 56 data bytes 64 bytes from 10.101.1.39: icmp_seq=0 ttl=255 time=0.0 ms 64 bytes from 10.101.1.39: icmp_seq=1 ttl=255 time=0.0 ms ^C --- 10.101.1.39 ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max = 0.0/0.0/0.0 ms

 

Forti600E_03 # exe ping 10.101.1.40 PING 10.101.1.40 (10.101.1.40): 56 data bytes 64 bytes from 10.101.1.40: icmp_seq=0 ttl=255 time=0.0 ms 64 bytes from 10.101.1.40: icmp_seq=1 ttl=255 time=0.0 ms 64 bytes from 10.101.1.40: icmp_seq=2 ttl=255 time=0.0 ms 64 bytes from 10.101.1.40: icmp_seq=3 ttl=255 time=0.0 ms 64 bytes from 10.101.1.40: icmp_seq=4 ttl=255 time=0.0 ms

--- 10.101.1.40 ping statistics --- 5 packets transmitted, 5 packets received, 0% packet loss round-trip min/avg/max = 0.0/0.0/0.0 ms

 

Forti600E_03 # exe ping 10.101.1.254 ^CPING 10.101.1.254 (10.101.1.254): 56 data bytes

--- 10.101.1.254 ping statistics --- 3 packets transmitted, 0 packets received, 100% packet loss

 

====can not get mgmt (gateway) mac adddress ( modified) ======

Forti600E_03 # diag ip arp list index=10 ifname=port2 10.0.0.246 f0:00:00:00:00:46 state=00000002 use=11 confirm=0 update=27723 ref=68 index=28 ifname=root 0.0.0.0 00:00:00:00:00:00 state=00000040 use=1605 confirm=11 update=513397 ref=7 index=3 ifname=mgmt 10.101.1.254 state=00000001 use=4 confirm=2877 update=4 ref=4 index=4 ifname=ha 169.254.0.2 e0:00:00:00:00:c5 state=00000080 use=27768406 confirm=513701 update=513701 ref=0

Forti600E_03 #

 

 

 

 

 

 

 

 

 

Any advice and recommendation ?

 

many thanks

 

 

 

 

 

 

 

3 REPLIES 3
BensonLEI
Contributor

Fixed, thanks

ede_pfau

how then? let us participate from you progress, please.

I noticed there is no "config management" section in your HA setup...has that been changed in v6.4?


Ede

"Kernel panic: Aiee, killing interrupt handler!"
Ede"Kernel panic: Aiee, killing interrupt handler!"
BensonLEI

Hi, Ede,

 

Physical mgmt interface can be used for HA mgmt interface ; no "HA management  interface Reservation" is requirement, basic documents refer to the following:

 

FortiGate HA Cluster Management IP - In Band Method v6 - (fullradius.com)

Fortigate Management Interface in HA Mode – UNIX fu

 

But the documents are not exactly working for V6.4.4 ; two problems I am still studying:

1. I have to assign two subnets both for interface IP and management-IP 

2. Could not view the physical mac add of the management-IP

 

( my findings might be wrong, I am still studying them )

 

Cheers

 

 

Labels
Top Kudoed Authors