Mixing SSID traffic modes

Author
dieter
Bronze Member
  • Total Posts : 34
  • Scores: 2
  • Reward points: 0
  • Joined: 2018/01/04 06:04:13
  • Status: offline
2021/01/14 03:01:56 (permalink)
0

Mixing SSID traffic modes

All our SSID's are tunneled. But now I need a locally bridged SSID (name "tech") in a separate VLAN (eg VLAN20). VLAN20 is an existing VLAN interface on the Fortigate (serving as gateway, DHCP, DNS...).
A few existing tunneled SSID's and the new bridged SSID need to be available on the same access points.
 
Fortigate is still on 5.8.6.
Switchport where the access point is connected should accept both VLANs: CAPWAP untagged/default, VLAN20 tagged (since I guess AP is tagging bridged traffic with setting "Optional VLAN ID" in SSID config on the fortigate).
 
My wifi client authenticates fine to SSID tech (WPA2 pre shared key for testing), but does not get an IP from DHCP. With manual IP on the client device, I can't even ping the VLAN20 interface IP (gateway). Nothing of significance in logs either...
 
I must be missing something.
Is it even possible ?
 
#1

1 Reply Related Threads

    dieter
    Bronze Member
    • Total Posts : 34
    • Scores: 2
    • Reward points: 0
    • Joined: 2018/01/04 06:04:13
    • Status: offline
    Re: Mixing SSID traffic modes 2021/01/14 08:27:18 (permalink)
    0
    Ok, got it working, so it is possible.
     
    VLAN was missing on a trunk somewhere in between...
    #2
    Jump to:
    © 2021 APG vNext Commercial Version 5.5