Execute ping "sendto Failed"

[prasanth]

Dear All,

we have FortiGate 100E (V6.0.10) with two type of internet connection.

1) IDA -wan1

2) ADSL -wan2

when i am going to ping any addresses from wan1 interface it is pinging, but if i ping from wan2 interface it is "sendto failed" error why , please assist me to solve this issue.

Thanks & Regards,

Prasanth

[Yurisk]

You mean you are pinging some host on the Internet from the Fortigate with source-address of the pings set once to wan1 and once to wan2?

[Andres21216]

Hello, The same thing happens to me, I have a 100E in 6.2.6 with a sdwan with wan1 and wan2. It was working for 3 days well and now having both interfaces active all navigation falls, publication (virtualip) I have to turn off the wan2 and at least it resets with 1 interface. The funny thing is that having the 2 interfaces active I want to ping from wan2 to 8.8.8.8 and I have the error "sent to failed", maybe any ideas?

[bassam117]

i am having the same issue i have changed my wan public ip address as ISP requested to 91.X.X.X and when pinging 8.8.8.8 i am receiving sendto failed error also no internet connection  .. when reverting back to the old IP 194.X.X.X every thing is working and internet is back and able to ping 8.8.8.8

any clue what to do and how to solve that?

[Andres21216]

Hello everyone, in my case the problem was a duplication of ip, one of the firewall administrators configured an ippool in a range in which the gateway of the wan interface was located.

I see it as an error in the ios of the Fortigate since it should not allow saving such a change. I hope it serves you. Greetings