Hot!SD WAN Issue

Author
Post
Essentials Only Full Version
snud
New Member
  • Total Posts : 2
  • Scores: 0
  • Reward points: 0
  • Joined: 2021/01/04 10:31:50
  • Status: offline
2021/01/05 03:28:19 (permalink)
0

SD WAN Issue

I am setting up a Fortigate 60F (FortiOS v6.0.9) with SD WAN for failover from a PPOE fiber connection (WAN1) to a DHCP 4g router (WAN2) but am running into an issue.
 
WAN1 and WAN2 work individually with my IPv4 policy when configured as the outgoing interface, but when I add WAN2 to the SD WAN and change the IPv4 policy outgoing interface to SD WAN my clients have no internet connection. I have WAN2 as the single interface in the SD WAN with a load balancing rule for 100% of the sessions as I don´t want to remove the WAN1 connection from my other policies until the SD WAN is working.
 
I have configured a performance SLA with a successful 8.8.8.8 ping on the SD WAN.
 
Any help would be greatly appreciated.
 
 

Attached Image(s)

#1

3 Replies Related Threads
    Darkstar
    New Member
    • Total Posts : 17
    • Scores: 0
    • Reward points: 0
    • Joined: 2020/04/02 22:46:21
    • Status: offline
    Re: SD WAN Issue 2021/01/06 02:03:41 (permalink)
    0
    Did You set up gateway for sd-wan member interfaces? There are zeroes in your pick. Not that much of experience on previous versions, running 6.4 ant sd-wan is much different there. Update yout fortigate before, it will get messed up after update as it introduces new concepts like sd-wan zones.
    #2
    pyy
    Bronze Member
    • Total Posts : 32
    • Scores: 2
    • Reward points: 0
    • Joined: 2015/10/21 10:57:48
    • Status: offline
    Re: SD WAN Issue 2021/01/11 06:57:44 (permalink)
    0
    you need to route the traffic to the sdwan interface.
    #3
    snud
    New Member
    • Total Posts : 2
    • Scores: 0
    • Reward points: 0
    • Joined: 2021/01/04 10:31:50
    • Status: offline
    Re: SD WAN Issue 2021/01/14 08:29:13 (permalink)
    0
    I have updated the gateway for the SD-WAN interface members to the default gateway that was retrieved from the server when configuring the WAN2 interface (192.168.8.1). The WAN2 interface is a Huawei B315 with a 4G sim. Is this correct?
    #4
    Jump to:
    © 2021 APG vNext Commercial Version 5.5