AnsweredHot!Restore conf from USB - Error

Author
random_guy
Bronze Member
  • Total Posts : 24
  • Scores: 0
  • Reward points: 0
  • Joined: 2019/12/12 05:49:55
  • Status: offline
2020/10/27 07:30:24 (permalink)
0

Restore conf from USB - Error

Trying to restore a configuration from file to a pair of 60e but keep receiving the message below. I downloaded the config directly from a production device so I *know* its good. Have tried on 2 different 60e. 2 usb drives. Factory reset both firewalls.  Firmware is the same level on the device as on the config. Google shows virtually nothing for the return code. I'm lost here. 
 
FGT60 # exec restore image usb config.conf
This operation will replace the current firmware version!
Do you want to continue? (y/n)y

Please wait...

Copy image config.conf from USB disk ...
Get image from USB disk OK.
Check image error.
Command fail. Return code -28

#1
lobstercreed
Platinum Member
  • Total Posts : 345
  • Scores: 43
  • Reward points: 0
  • Joined: 2018/11/28 14:57:58
  • Location: Sedalia, MO
  • Status: offline
Re: Restore conf from USB - Error 2020/10/27 07:43:12 (permalink) ☼ Best Answerby random_guy 2020/10/27 07:45:23
0
You're using the wrong command to restore a config.  You're using the command for restoring firmware.  When in doubt, use a "?"
 
If you do a "?" after execute restore you'll see the options and the one you want.
#2
random_guy
Bronze Member
  • Total Posts : 24
  • Scores: 0
  • Reward points: 0
  • Joined: 2019/12/12 05:49:55
  • Status: offline
Re: Restore conf from USB - Error 2020/10/27 07:45:21 (permalink)
0
Welp, I'm dumb.... 
 
Thanks
#3
sw2090
Expert Member
  • Total Posts : 824
  • Scores: 60
  • Reward points: 0
  • Joined: 2017/06/14 01:27:25
  • Location: Regensburg
  • Status: offline
Re: Restore conf from USB - Error 2020/10/28 05:14:48 (permalink)
0
Or use the usb auto restore feature. Then you just need to plug a stick with the coonfig on it with the correct filename and reboot the fgt with the stick plugged in and will auto restore that config.
#4
sw2090
Expert Member
  • Total Posts : 824
  • Scores: 60
  • Reward points: 0
  • Joined: 2017/06/14 01:27:25
  • Location: Regensburg
  • Status: offline
Re: Restore conf from USB - Error 2020/10/28 05:31:19 (permalink)
0
nt
#5
Jump to:
© 2020 APG vNext Commercial Version 5.5