Virtual IPs with Port forwarding cannot crate

Author
se7en102
New Member
  • Total Posts : 3
  • Scores: 0
  • Reward points: 0
  • Joined: 2020/06/29 18:00:35
  • Status: offline
2020/10/06 02:07:52 (permalink)
0

Virtual IPs with Port forwarding cannot crate

Dear bros,
My company have firewall fortigate 101E and inside comany we have 3 NVR ( CCTV) , so I want to public them to check camera on my phone by WAN .
So i did :
 - Config virtual ips  for eachs NVR go to 1 WAN , different port
 
NVR 1 : 172.16.1.2 port 82, 8022 -> WAN (115.79.219.100): port 82, 8022 
NVR 2: 172.16.1.3 port 84, 8044-> WAN (115.79.219.100): port 84, 8044
NVR 3: 172.16.1.4 Port 88, 8088 -> WAN (115.79.219.100): port 84, 8044
 
Open 3 policy
 
When i config to use service , rule ok, but not running.
and i did with port forwarding it error  https://www.youtube.com/watch?v=Y9qyBo06meo
 
how can i fix in this case to public my cctv ?
 
 

Attached Image(s)

#1

2 Replies Related Threads

    fcb
    Bronze Member
    • Total Posts : 49
    • Scores: 2
    • Reward points: 0
    • Joined: 2007/06/20 21:01:59
    • Status: offline
    Re: Virtual IPs with Port forwarding cannot crate 2020/10/08 22:49:39 (permalink)
    0
    se7en102
    Dear bros,
    NVR 1 : 172.16.1.2 port 82, 8022 -> WAN (115.79.219.100): port 82, 8022 
    NVR 2: 172.16.1.3 port 84, 8044-> WAN (115.79.219.100): port 84, 8044
    NVR 3: 172.16.1.4 Port 88, 8088 -> WAN (115.79.219.100): port 84, 8044
     

     
    NVR 2 and 3 both have the below - Is that a type-o or what?
     
    WAN (115.79.219.100): port 84, 8044
    WAN (115.79.219.100): port 84, 8044

     You created these policies with the destination being the VIP/Port forward listed?
    #2
    se7en102
    New Member
    • Total Posts : 3
    • Scores: 0
    • Reward points: 0
    • Joined: 2020/06/29 18:00:35
    • Status: offline
    Re: Virtual IPs with Port forwarding cannot crate 2020/10/08 23:04:02 (permalink)
    0
    Dear Bros,
    my mistake about port , it must be :
    NVR 1 : 172.16.1.2 port 82, 8022 -> WAN (115.79.219.100): port 82, 8022 
    NVR 2: 172.16.1.3 port 84, 8044-> WAN (115.79.219.100): port 84, 8044
    NVR 3: 172.16.1.4 Port 88, 8088 -> WAN (115.79.219.100): port 88, 8088
     
    We have Virtual IPs with filter option services, it not work. no have data transfer.
    I was delete them in policy and in Virtual IPs.
    - Service was defined like : Name =NVR3, ip =1721.6.1.4 , TCP/88 TCP/8088
    - Make new VIPs and only enable Port forwarding TCP 88 and 2nd VIPs for Port 8088
    - New policy with disable NAT option , and now it open.
     
    It works for me now.
    thank you.
     
     
     
    #3
    Jump to:
    © 2020 APG vNext Commercial Version 5.5