Hot!Fortigate console port configuration

Author
BensonLEI
Bronze Member
  • Total Posts : 39
  • Scores: 0
  • Reward points: 0
  • Joined: 2020/06/01 21:08:14
  • Status: offline
2020/10/06 02:05:15 (permalink)
0

Fortigate console port configuration

Hi, Guys,
 
The terminal server (A RJ45 jack) is configured for connecting the console port of the Forti600E, but I can not find the console port, as the attached.
 
Please advise the way to configure the Fortigate console port, thx a lot.
 

Attached Image(s)

#1

2 Replies Related Threads

    lobstercreed
    Platinum Member
    • Total Posts : 315
    • Scores: 37
    • Reward points: 0
    • Joined: 2018/11/28 14:57:58
    • Location: Sedalia, MO
    • Status: offline
    Re: Fortigate console port configuration 2020/10/06 09:38:05 (permalink)
    0
    Have you tried looking at the actual device?  or the datasheet as I will link here: https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/FortiGate_600E.pdf
     
    It's just to the left of the interfaces on your GUI screenshot.
    #2
    Toshi Esumi
    Expert Member
    • Total Posts : 2275
    • Scores: 219
    • Reward points: 0
    • Joined: 2014/11/06 09:56:42
    • Status: offline
    Re: Fortigate console port configuration 2020/10/06 17:11:14 (permalink)
    0
    I think OP is looking for a way to "configure" the console port in GUI. You can configure only from CLI under "config sys console". I think only baud rate can be changed form the default 9600. The rest is data-8bit/stop-1bit/parity-none/flow control-none and fixed. Below is my 50E's settings:
    fg50e-utm (console) # show full
    config system console
        set mode line
        set baudrate 9600
        set output more
        set login enable
        set fortiexplorer enable
    end


    #3
    Jump to:
    © 2020 APG vNext Commercial Version 5.5