Hot!Change IP-address of device in Fortianalyzer

Author
orrsjo
New Member
  • Total Posts : 8
  • Scores: 0
  • Reward points: 0
  • Joined: 2018/01/22 05:51:10
  • Status: offline
2020/09/10 12:54:56 (permalink)
0

Change IP-address of device in Fortianalyzer

Hello,
I have tried to change the IP-address of a device connected to a FortiAnalyzer.
However, it seems not possible to change the IP-address, in the webb-GUI. When reading user guidelines, I figured  it should be possible to do this,
See attached picture. Any idea on how I can do this? Do really I have to remove the device completely from the analyzer and then add it again?
 
Erik

Attached Image(s)

#1
chall_FTNT
skyhigh
  • Total Posts : 345
  • Scores: 36
  • Reward points: 0
  • Joined: 2003/11/28 16:19:30
  • Status: offline
Re: Change IP-address of device in Fortianalyzer 2020/09/10 13:19:41 (permalink)
0
The FortiAnalyzer will learn about the new IP from the FortiGate.  The IP is only used by the FortiAnalyzer when adding the device for the first time.  After that, it is the serial # which is important.
#2
chall_FTNT
skyhigh
  • Total Posts : 345
  • Scores: 36
  • Reward points: 0
  • Joined: 2003/11/28 16:19:30
  • Status: offline
Re: Change IP-address of device in Fortianalyzer 2020/09/10 13:22:00 (permalink)
0
We acknowledged that we should not allow manual entry of IP address in bug ID 536856.  The field was greyed out as of 6.2.3 & 6.4.0.
#3
Jump to:
© 2020 APG vNext Commercial Version 5.5