How to Config redundant ISP with HA without having switch?

Author
akabarasif
New Member
  • Total Posts : 3
  • Scores: 0
  • Reward points: 0
  • Joined: 2020/07/30 20:52:09
  • Status: offline
2020/07/30 20:59:26 (permalink)
0

How to Config redundant ISP with HA without having switch?

HI,
we have 2 ISPs directly connected. it is P2P link one is L3-P2P another is L2-P2P, 1 link is connected to primary firewall and 2nd is connected to secondary firewall, both firewall has active/active HA enabled. how can i utilised both ISPs 50/50%. Stacked core switch is connected to both firewall.
#1

1 Reply Related Threads

    lobstercreed
    Gold Member
    • Total Posts : 251
    • Scores: 32
    • Reward points: 0
    • Joined: 2018/11/28 14:57:58
    • Location: Sedalia, MO
    • Status: offline
    Re: How to Config redundant ISP with HA without having switch? 2020/07/31 00:27:29 (permalink)
    0
    Can you not buy a couple of tiny cheap unmanaged switches?  If you're going to do HA you need to do it right which means you're going to need a switch.
     
    If you don't want to buy anything, create two VLANs for this purpose on your core switch.  It does consume 6 total ports, but that's what we have done.  VLAN 3333 is ISP1 and has 1 port out to the ISP equipment, 1 port to primary firewall, 1 port to secondary firewall.  Then VLAN 3334 is ISP2 and has 1 port out to the ISP equipment, 1 port to primary firewall, 1 port to secondary firewall.
    #2
    Jump to:
    © 2020 APG vNext Commercial Version 5.5