Helpful ReplyHot!Enable DHCP Option 43 on Fortinet 30OD

Author
Kevinta
New Member
  • Total Posts : 3
  • Scores: 0
  • Reward points: 0
  • Joined: 2020/05/10 22:06:24
  • Status: offline
2020/05/10 22:46:52 (permalink)
0

Enable DHCP Option 43 on Fortinet 30OD

Hello every one,
My cisco AP ( cisco 2802iS K9) can not assign form DHCP server ( user FOrtinet300d), i refer on Cisco comunity .need enable DHCP option 43 on DHCP server,
how to enable DHCP option 43 and input correct value on Fortinet DHCP ? 
thanks so much
 

Attached Image(s)

#1
localhost
Gold Member
  • Total Posts : 135
  • Scores: 25
  • Reward points: 0
  • Joined: 2015/05/21 02:47:51
  • Location: Zug, Switzerland
  • Status: offline
Re: Enable DHCP Option 43 on Fortinet 30OD 2020/05/11 07:50:27 (permalink)
4 (1)
Looks like you copied your option 43 straight out of the manual.
In the example from the manual the primary WLC controller ist at 192.168.10.5 and secondary WLC controller at 192.168.10.20.
Which most likely is not the case in your setup?
 
This (network)guy explains it pretty well, how to get the hexstring for your setup:
 
https://networkguy.de/cisco-wlc-dhcp-option-43/
 
#2
emnoc
Expert Member
  • Total Posts : 5863
  • Scores: 387
  • Reward points: 0
  • Joined: 2008/03/20 13:30:33
  • Location: AUSTIN TX AREA
  • Status: offline
Re: Enable DHCP Option 43 on Fortinet 30OD 2020/05/11 08:12:40 (permalink) ☄ Helpfulby Kevinta 2020/06/12 21:03:44
3 (1)
That great but a simplified sites has opt43 generator it might be of help
 
https://shimi.net/services/opt43/
 
 
Ken Felix

PCNSE 
NSE 
StrongSwan  
#3
Kevinta
New Member
  • Total Posts : 3
  • Scores: 0
  • Reward points: 0
  • Joined: 2020/05/10 22:06:24
  • Status: offline
Re: Enable DHCP Option 43 on Fortinet 30OD 2020/06/12 21:05:52 (permalink)
0
thank@  emnoc ,  Mr Localhost for support  , I  was susscess with your instruction 
#4
Jump to:
© 2020 APG vNext Commercial Version 5.5