Reply to post

Hot!FortiGate 60E multiwan setup

Author
SpartaniusZG
New Member
  • Total Posts : 1
  • Reward points: 0
  • Joined: 2020/04/04 06:35:06
  • Status: offline
2020/04/04 06:56:08 (permalink)

FortiGate 60E multiwan setup

85.85.85.85/29 with WAN 1 IP 85.85.85.82 with default gateway 85.85.85.81
VIP are 85.85.85.82 - 86
86.86.86.86/29 with WAN 2 ip 86.86.86.82 with default gateway 86.86.86.81
VIP are 86.86.86.82 - 86

I have 6 vlans(vlan 1-3), 3 are going on wan 1 Out other 3 on WAN 2 Out (vlan 4- 6)

I have static routes
0.0.0.0/0 85.85.85.81 wan1
0.0.0.0/0 86.86.86.81 wan2

Policy route define belonging vlan with belonging wan address
For example vlan 1 to wan 1-vlan 1 addresses-all
All policy to wan are applied and working

When i try traceroute for every vlan the defaul gateway is 85.85.85.81!!

How to set policy that each vlan has belonging default route!??

1 Reply Related Threads

    abelio
    Expert Member
    • Total Posts : 3658
    • Reward points: 0
    • Joined: 2005/03/31 13:28:59
    • Location: Buenos Aires, Argentina
    • Status: offline
    Re: FortiGate 60E multiwan setup 2020/04/04 10:18:32 (permalink)
    Hello
    you're posting in the wrong forum; this one is just for ADC stuff.
     
    Re-post this in the relevant FortiGate forum, surely you'll be luckier there
     
     
     

    regards
    --
    Abel
    Guest
    Quick Reply: (Open Full Version)
      Enter the random characters shown
    Submit Post
    Jump to:
    © 2020 APG vNext Commercial Version 5.5