AnsweredHot!Two dialup VPN tunnels to use the same interfaces

Page: < 12 Showing page 2 of 2
Author
itemanuel
New Member
  • Total Posts : 8
  • Scores: 0
  • Reward points: 0
  • Joined: 2020/03/31 08:59:16
  • Status: offline
Re: Two dialup VPN tunnels to use the same interfaces 2020/04/06 01:09:40 (permalink)
0
Thanks Jan
With Pedros input I realised I had to change exaktly this using CLI. So
set peertype one
set peerid "id-tunnel-1"
set localid "my-local-id"
and
set peertype one
set peerid "id-tunnel-2"
set localid "my-local-id"
for the other tunnel.

In FortiClient there's one confusing thing though. We had to insert the Peer ID of the selected tunnel in the field "Local ID" in order to have it work correctly.
Now everything's solved! Apart from an issue concerning macOS Catalina users (https://forum.fortinet.com/tm.aspx?m=179386), which I hope will be solved soon. For them we configured an SSL-VPN tunnel. Works for them as well as for iOS clients.
 
So thanks everybody contributing!
Have a good time and stay healthy
 
Itemanuel
#21
emnoc
Expert Member
  • Total Posts : 5622
  • Scores: 357
  • Reward points: 0
  • Joined: 2008/03/20 13:30:33
  • Location: AUSTIN TX AREA
  • Status: offline
Re: Two dialup VPN tunnels to use the same interfaces 2020/04/06 07:39:56 (permalink)
0
Run your "diag debug flow" and inspect the action after during the user(s) testing.
 
Ken Felix

PCNSE 
NSE 
StrongSwan  
#22
Page: < 12 Showing page 2 of 2
Jump to:
© 2020 APG vNext Commercial Version 5.5