Multicast and VLANs with FortiGate/HP Aruba
Hi there and thank you for reading
Our devices :
Router : Fortigate 100D (6.0.6)
Switch : HP Aruba 2530-24G
Extra : Startech HDMI over IP Extender Kit
I have to setup a Video system with HDMI over IP devices(startech ST12MHDLAN) : we have 3 TV(separated) in our site where we want to cast informations (video and pictures).
First, I managed to cast my PC without problems on another PC screen, but with no VLANs.
I don't really know how I can do that, but after researching, I found :
Fortigate is in NAT mode
I enabled Multicast in the Fortigate
I enabled IGMP in the switch
There is a VLAN called "Video" in the Switch, so all the HDMI over IP devices should be in this VLAN
I think that my first problem is create a route to make the Video VLAN (VLAN 100) accessible, but I don't really know how to do it...
I found that I have to create an interface between Forti and the VLAN ? is that right ?
So should I create a software interface to route it after ?
So if I have to do that, I will create an IP address for that interface ? Is this IP become the gateway (like 10.25.100.1)?
What about firewall-policy rules ?
These are my first questions, I will have others for sure :)
Thanks for answers, thanks for help
post edited by Cdric - 2020/01/22 00:54:20