Hot!Traceroute on FortiOS CLI thru Specific Interface

Author
theArties
New Member
  • Total Posts : 19
  • Scores: 2
  • Reward points: 0
  • Joined: 2017/04/04 00:04:32
  • Status: offline
2019/12/09 22:23:30 (permalink) 5.6
0

Traceroute on FortiOS CLI thru Specific Interface

Hi All,
 
I'm using a Forti 200D with 4 WANs.
Wondering if its possible to set which WAN interfaces that a trace route will use. 
 
Thank you.
 
#1

3 Replies Related Threads

    sw2090
    Platinum Member
    • Total Posts : 502
    • Scores: 27
    • Reward points: 0
    • Joined: 2017/06/14 01:27:25
    • Location: Regensburg
    • Status: offline
    Re: Traceroute on FortiOS CLI thru Specific Interface 2019/12/10 01:25:15 (permalink)
    5 (1)
    traceroute on any device will always use the corresponding route for the target. If there is no statc route for the target it will use the default route. If you have 4 WAN then you either use sd-wan (then the sd-wan decides which wan is used accoarding to the balancing algorithm you chose) or you have to have foour default routes with diffrent priority or distance and then those are used top down by prop/sdistance.
     
    I don't think you can tell traceroute to use a specific interface.
    #2
    Toshi Esumi
    Expert Member
    • Total Posts : 1854
    • Scores: 157
    • Reward points: 0
    • Joined: 2014/11/06 09:56:42
    • Status: offline
    Re: Traceroute on FortiOS CLI thru Specific Interface 2019/12/10 10:44:46 (permalink)
    5 (1)
    If you want to traceroute through a specific path out of 4 options, set a static route for the traceroute destination (/32) to the interface.
    #3
    theArties
    New Member
    • Total Posts : 19
    • Scores: 2
    • Reward points: 0
    • Joined: 2017/04/04 00:04:32
    • Status: offline
    Re: Traceroute on FortiOS CLI thru Specific Interface 2020/01/08 18:01:29 (permalink)
    0
    Thank you to both for your input. Will test out the static route / priority function to set the traceroute path.
    #4
    Jump to:
    © 2020 APG vNext Commercial Version 5.5