Hot!PPPoE with static IP

Author
SubHero
New Member
  • Total Posts : 3
  • Scores: 0
  • Reward points: 0
  • Joined: 2019/11/08 21:39:07
  • Status: offline
2019/11/09 00:41:03 (permalink)
0

PPPoE with static IP

Hi all,
 
I have an issue currently, my office is subscribing broadband with PPPoE connection with add on of 1 static IP.
But when I want to configure on my interface wan,it seem firewall cant get the IP.
I already put the static IP in unnumbered IP but seem no avail.
Link Status and administrative status is up but the status is failed.

Not sure how to do this. I try to do nat but seems not workin.
post edited by SubHero - 2019/11/10 21:18:13
#1

5 Replies Related Threads

    sw2090
    Platinum Member
    • Total Posts : 484
    • Scores: 23
    • Reward points: 0
    • Joined: 2017/06/14 01:27:25
    • Location: Regensburg
    • Status: offline
    Re: PPPoE with static IP 2019/11/11 00:45:43 (permalink)
    0
    hm we do that here by doing pppoe just as usuall without any special settings. Once the connection is set to static ip it gets static ip from our ISP.
    The only other static lines we have do not do pppoe at all.
    #2
    emnoc
    Expert Member
    • Total Posts : 5389
    • Scores: 353
    • Reward points: 0
    • Joined: 2008/03/20 13:30:33
    • Location: AUSTIN TX AREA
    • Status: offline
    Re: PPPoE with static IP 2019/11/11 01:00:19 (permalink)
    0
    You can't set a static ip on a PPPoE interface. That's a dynamic ip same as in DHCP. Your ISP does the framed-address via the PPPoE authentication in RADIUS and attribute 8. You need to ensure the  PPPoE dialup NAS is set correctly to assign you your static ip address.
     
     
     

    PCNSE 
    NSE 
    StrongSwan  
    #3
    SubHero
    New Member
    • Total Posts : 3
    • Scores: 0
    • Reward points: 0
    • Joined: 2019/11/08 21:39:07
    • Status: offline
    Re: PPPoE with static IP 2019/11/12 20:24:06 (permalink)
    0
    means u only key in the id authentication and password without set your ip address in outnumbered ip?
    #4
    sw2090
    Platinum Member
    • Total Posts : 484
    • Scores: 23
    • Reward points: 0
    • Joined: 2017/06/14 01:27:25
    • Location: Regensburg
    • Status: offline
    Re: PPPoE with static IP 2019/11/12 23:12:59 (permalink)
    5 (1)
    yes.
    Either you have a completeley static setup without pppoe or your static ip is assigned by the ISP during pppoe handshake. So just enter credentials and no ip.
    #5
    emnoc
    Expert Member
    • Total Posts : 5389
    • Scores: 353
    • Reward points: 0
    • Joined: 2008/03/20 13:30:33
    • Location: AUSTIN TX AREA
    • Status: offline
    Re: PPPoE with static IP 2019/11/12 23:41:19 (permalink)
    0
    Agreed the  ISP will provide your  static-address in the offer.
     
    Ken Felix
     

    PCNSE 
    NSE 
    StrongSwan  
    #6
    Jump to:
    © 2019 APG vNext Commercial Version 5.5