Hot!fortigate 60e Conflicts with 'wan1' subnet

New Member
  • Total Posts : 1
  • Scores: 0
  • Reward points: 0
  • Joined: 2019/09/06 09:43:35
  • Status: offline
2019/09/06 09:53:04 (permalink)

fortigate 60e Conflicts with 'wan1' subnet

Our ISP gave us 10.1.10.* for ip ranges, the VoIP phones are using these.  Yesterday I was adding the fortigate 60E as firewall, while try to config the "internal" (LAN) to be (using 6.0.4), I got "Conflicts with 'wan1' subset' error, I looked at the WAN1, it is  Any suggestions would be much appreciated!

1 Reply Related Threads

    Expert Member
    • Total Posts : 6188
    • Scores: 512
    • Reward points: 0
    • Joined: 2004/03/09 01:20:18
    • Location: Heidelberg, Germany
    • Status: offline
    Re: fortigate 60e Conflicts with 'wan1' subnet 2019/09/08 10:26:26 (permalink)
    As the FGT is a router, you cannot have the same subnet address on two different ports.
    Your ISP gave you private addresses - which is at least uncommon - from the 10.1.10.x range. For the LAN, you need to choose a different range, like for the 'internal' port. The FGT will do the routing between both subnets, policies permitting.


    " Kernel panic: Aiee, killing interrupt handler!"
    Jump to:
    © 2020 APG vNext Commercial Version 5.5