WCCP return paket

Author
scan
New Member
  • Total Posts : 6
  • Scores: 0
  • Reward points: 0
  • Joined: 2019/07/22 02:33:51
  • Status: offline
2019/08/11 23:18:51 (permalink) 6.0
0

WCCP return paket

Hi all
 
I'm working on a WCCP Optimization with Riverbed. 
The WCCP it self works and the init paket from the client to the server are forwarded to the Riverbed (WAN Optimization) and send to the server. All good at this point.
But, the return paket are sending directly to the client. But, Riverbed need this paket as well, because there are exchange information between the local and the remote Riverbed.
In Cisco example configuration you need to activate the WCCP on the outgoing and incoming ACL.
How can I solve this issue with a Fortigate?
 
Thanks in advance.
#1

2 Replies Related Threads

    emnoc
    Expert Member
    • Total Posts : 5209
    • Scores: 339
    • Reward points: 0
    • Joined: 2008/03/20 13:30:33
    • Location: AUSTIN TX AREA
    • Status: offline
    Re: WCCP return paket 2019/08/12 01:09:51 (permalink)
    0
    How do you have the WCCP built ? on a 3rd leg { Tertiary Interface } ? And what are you using for forwarding  GRE or L2. WCCP is straight forward for any WCCP client from fortigate side of things.
     

    PCNSE,  NSE , Forcepoint ,  StrongSwan Specialist
    #2
    scan
    New Member
    • Total Posts : 6
    • Scores: 0
    • Reward points: 0
    • Joined: 2019/07/22 02:33:51
    • Status: offline
    Re: WCCP return paket 2019/08/12 06:22:42 (permalink)
    0
    Hi
     
    WCCP Client ist on a dedicated Interface connected. 
    The WCCP configuration are follow:
    config system wccp
    edit "101"
    set router-id 10.230.123.111
    set server-list 10.230.123.10 255.255.255.255
    set forward-method any
    set return-method any
    next
    end
     
    And activated on the Interface and matching firewall policy with set wccp enable.
    #3
    Jump to:
    © 2019 APG vNext Commercial Version 5.5