SD-WAN Policy Based Routes not working with VPN interfaces

Author
neonbit
Expert Member
  • Total Posts : 513
  • Scores: 65
  • Reward points: 0
  • Joined: 2013/07/02 21:39:52
  • Location: Dark side of the moon
  • Status: offline
2019/08/07 14:37:25 (permalink) 6.2
0

SD-WAN Policy Based Routes not working with VPN interfaces

I've upgraded some of my devices to 6.2.1 recently and tested the SD-WAN feature and ran into a funny issue with VPN's.
 
In the SD-WAN I have four interfaces added, two are my underlay physical interfaces (MPLS and INTERNET) and the other two are the overlay VPNs on these interfaces (VPN-MPLS and VPN-INTERNET).
 
I've noticed that any SD-WAN rules that reference the VPN interfaces show up in the policy based routes but don't have any interfaces in the 'To' column. The SD-WAN rules that have the underlay interfaces show up correctly.
 
As such none of the SD-WAN rules that I have actually work as no interfaces show up. Attached screenshot shows the SD-WAN rule that references the VPN interfaces as empty, while the one above it referencing the underlay interfaces correctly.
 
Wondering if anyone had this same problem?

Attached Image(s)

#1

1 Reply Related Threads

    neonbit
    Expert Member
    • Total Posts : 513
    • Scores: 65
    • Reward points: 0
    • Joined: 2013/07/02 21:39:52
    • Location: Dark side of the moon
    • Status: offline
    Re: SD-WAN Policy Based Routes not working with VPN interfaces 2019/08/14 13:10:08 (permalink)
    0
    All good found the issue. The performance SLA I had for the VPN SD-WAN rules was not met (server was down), so the route was in the policy routing table but had no interfaces in it. As soon as the SLA was good the interfaces got populated correctly.
    #2
    Jump to:
    © 2019 APG vNext Commercial Version 5.5