Hot!1 of 2 Managed Fortiswitches always staying offline

Author
jasinedward
New Member
  • Total Posts : 2
  • Scores: 0
  • Reward points: 0
  • Joined: 2019/07/23 09:11:21
  • Status: offline
2019/07/23 09:25:14 (permalink)
0

1 of 2 Managed Fortiswitches always staying offline

Hello.  I am running into an issue setting up managed fortiswitches in an HA environment. I have 2 500e firewalls in HA and 2 524d's.  Port 1 firewall 1 goes to port 1 on switch 1.  Port 2 firewall 1 goes to switch 2 port 1.  Port 1 on firewall 2 goes to switch 1 port 2. Port 2 on firewall 2 goes to switch 2 port 2. 
 
I have setup an aggregate interface and included port 1 and 2.  It detects both switches, but one always falls offline.
 
 

Attached Image(s)

#1

3 Replies Related Threads

    BrianB
    New Member
    • Total Posts : 17
    • Scores: 0
    • Reward points: 0
    • Status: offline
    Re: 1 of 2 Managed Fortiswitches always staying offline 2019/07/23 11:33:53 (permalink)
    0
    What version of FortiOS are you running? Is fortilink-split-interface enabled or disabled?
    #2
    jasinedward
    New Member
    • Total Posts : 2
    • Scores: 0
    • Reward points: 0
    • Joined: 2019/07/23 09:11:21
    • Status: offline
    Re: 1 of 2 Managed Fortiswitches always staying offline 2019/07/23 11:38:25 (permalink)
    0
    I am running 6.2.0 on all devices.  Fortilink-split-interface is disabled.  I have tried it both enabled and disabled with similar results...
    #3
    vad3rw3rks
    New Member
    • Total Posts : 2
    • Scores: 0
    • Reward points: 0
    • Joined: 2019/10/11 12:32:01
    • Status: offline
    Re: 1 of 2 Managed Fortiswitches always staying offline 2019/10/11 12:34:54 (permalink)
    0
    Were you able to get this resolved?  I am having a very similar issue.
     
     
    jasinedward
    Hello.  I am running into an issue setting up managed fortiswitches in an HA environment. I have 2 500e firewalls in HA and 2 524d's.  Port 1 firewall 1 goes to port 1 on switch 1.  Port 2 firewall 1 goes to switch 2 port 1.  Port 1 on firewall 2 goes to switch 1 port 2. Port 2 on firewall 2 goes to switch 2 port 2. 
     
    I have setup an aggregate interface and included port 1 and 2.  It detects both switches, but one always falls offline.
     
     




    #4
    Jump to:
    © 2019 APG vNext Commercial Version 5.5