Hot!FortiGate 300E Port Descriptions

Author
jamesjames77
New Member
  • Total Posts : 1
  • Scores: 0
  • Reward points: 0
  • Joined: 2019/07/09 17:20:33
  • Status: offline
2019/07/09 17:28:58 (permalink)
0

FortiGate 300E Port Descriptions

What is the function of the VW1 & VW2 ports on the 300E?
Where are the WAN ports?
(see attached image)

Attached Image(s)

#1

2 Replies Related Threads

    hubertzw
    Gold Member
    • Total Posts : 192
    • Scores: 5
    • Reward points: 0
    • Joined: 2018/04/16 13:29:04
    • Status: offline
    Re: FortiGate 300E Port Descriptions 2019/07/10 02:53:26 (permalink)
    #2
    ede_pfau
    Expert Member
    • Total Posts : 6050
    • Scores: 480
    • Reward points: 0
    • Joined: 2004/03/09 01:20:18
    • Location: Heidelberg, Germany
    • Status: offline
    Re: FortiGate 300E Port Descriptions 2019/07/10 04:50:52 (permalink)
    0
    Usually, all ports are created equal...that is, port labels are printed for ease of use, not because some ports can only be used for incoming or outgoing traffic. So, choose some of the copper or SFP ports for your WAN(s).
     
    That said, there are of course exceptions to that rule.
    The "s1" and "s2" ports are dedicated sniffer ports. I haven't used them for that yet but I guess there is some info on "one-armed sniffer" in the Handbook.
    The "vw1" and "vw2" ports form a "virtual wire" pair. Traffc is flowing in one one port and out the other (Layer 2). Again, please look it up in the Handbook.
    The "mgmt" port is pre-configured for local-in management traffic. In the config, you'll see "set dedicated-to-management enable". Given that, you can assign an IP address from a subnet that is already in use on a different port. And, the "mgmt" port does not participate in routing.
     

    Ede

    " Kernel panic: Aiee, killing interrupt handler!"
    #3
    Jump to:
    © 2019 APG vNext Commercial Version 5.5