Forti wlc 50D is not booting

Author
vdevadas
New Member
  • Total Posts : 2
  • Scores: 0
  • Reward points: 0
  • Joined: 2019/07/04 00:30:29
  • Status: offline
2019/07/09 06:54:46 (permalink)
0

Forti wlc 50D is not booting

Hi,
 
Forti wlc 50D is not booting properly HDD light is in continues amber, status light shows nothing. Connected LAN port has no light. Cable and switch are working though.
 
Regards,
VD
#1

1 Reply Related Threads

    Dave Hall
    Expert Member
    • Total Posts : 1477
    • Scores: 163
    • Reward points: 0
    • Joined: 2012/05/11 07:55:58
    • Location: Canada
    • Status: offline
    Re: Forti wlc 50D is not booting 2019/07/09 09:08:09 (permalink)
    0
    If cable and switch are working are you able to reach the Forti wlc 50D by IP address?
     
    The Forti wlc 50D should come with a serial (rollover) cable that you can use to connect to the console port, though you may need to get your hands on a serial-to-USB adapter.  Using a laptop (or computer) connect to the console port and run (say) Putty. Powercycle the Forti wlc 50D and watch the console output for any errors. 

    NSE4/FMG-VM64/FortiAnalyzer-VM/5.4/6.0 (FWF40C/FW92D/FGT200D/FGT101E)/ FAP220B/221C
    #2
    Jump to:
    © 2019 APG vNext Commercial Version 5.5