Hot!ICMP Packet Capture from GUI

Author
ndjathe
New Member
  • Total Posts : 2
  • Scores: 0
  • Reward points: 0
  • Joined: 2019/06/13 06:13:14
  • Status: offline
2019/06/13 06:20:49 (permalink)
0

ICMP Packet Capture from GUI

Hello.
 
Please help!
 
I need to capture ICMP traffic on one interface of the firewall. I've enable the packet filter with protocol 1, but the only thing I capture is the ICMP Destination Unreachable. I want to capture also Echo, Reply, ...
 
Please Help!
Thank you in advance.
#1
Toshi Esumi
Expert Member
  • Total Posts : 1624
  • Scores: 137
  • Reward points: 0
  • Joined: 2014/11/06 09:56:42
  • Status: offline
Re: ICMP Packet Capture from GUI 2019/06/13 09:22:04 (permalink)
0
It doesn't sound like a packet capture problem. Instead likely a routing problem(s). Do you have a default route in the routing-table to an UP interface? Otherwise you shouldn't see "Unreachable".
#2
hubertzw
Gold Member
  • Total Posts : 192
  • Scores: 5
  • Reward points: 0
  • Joined: 2018/04/16 13:29:04
  • Status: offline
Re: ICMP Packet Capture from GUI 2019/06/15 02:37:53 (permalink)
0
Is the ping successful and you just don't see it in the pcap file?
Are you sure you monitor the correct interface?
'ICMP Destination Unreachanble' can be also from traceroute.
#3
Jump to:
© 2019 APG vNext Commercial Version 5.5