AnsweredHot!SSID Not Broadcasting

Author
epc.tech
New Member
  • Total Posts : 3
  • Scores: 0
  • Reward points: 0
  • Joined: 2019/06/11 13:24:35
  • Status: offline
2019/06/12 08:29:16 (permalink)
0

SSID Not Broadcasting

Just took over IT for a new company, never used Fortinet before, limited networking experience. Device is a FortiWifi 61E. Previous tech used generic consumer routers as APs, not sure why.
 
My goal is to configure a Guest Wifi with internet access but no access to other devices separate, and a bridged network so that I can join devices to our domain over Wifi when needed. I've tried a bunch of stuff, nothing's worked.
 
I've been trying to just to get a test network up, no matter what I try I never get and SSID to broadcast. I've dug through the CLI a bit, but still can't find a problem. Here is what I think is relevant, let me know if I'm missing something. Any help would be appreciated.
 

config wireless-controller inter-controller
    set inter-controller-mode disable
    set inter-controller-key [Nope]
    set inter-controller-pri primary
    set fast-failover-max 10
    set fast-failover-wait 10
end
config wireless-controller global
    set name ''
    set location ''
    set local-radio-vdom "root"
    set max-retransmit 3
    set data-ethernet-II disable
    set link-aggregation disable
    set mesh-eth-type 8755
    set fiapp-eth-type 5252
    set discovery-mc-addr 224.0.1.140
    set max-clients 0
    set rogue-scan-mac-adjacency 7
    set ipsec-base-ip 169.254.0.1
    set ap-log-server disable
    set ap-log-server-ip 0.0.0.0
    set ap-log-server-port 0
end
config wireless-controller vap
    edit "wifi"
        set vdom "root"
        set fast-roaming enable
        set external-fast-roaming disable
        set mesh-backhaul disable
        set max-clients 0
        set ssid "Guest Test"
        set broadcast-ssid enable
        set security wpa2-only-personal
        set pmf disable
        set voice-enterprise disable
        set fast-bss-transition disable
        set radius-mac-auth disable
        set encrypt AES
        set intra-vap-privacy disable
        set schedule "none"
        set ldpc rxtx
        set mpsk disable
        set local-standalone disable
        set local-bridging disable
        set split-tunneling disable
        set vlanid 0
        set multicast-rate 0
        set multicast-enhance disable
        set broadcast-suppression dhcp-up arp-known
        set me-disable-thresh 32
        set probe-resp-suppression disable
        set vlan-pooling disable
        set gtk-rekey disable
        set qos-profile ''
        unset rates-11a
        unset rates-11bg
        unset rates-11n-ss12
        unset rates-11n-ss34
        unset rates-11ac-ss12
        unset rates-11ac-ss34
        set passphrase [Nope]
    next
    edit "Internal"
        set vdom "root"
        set fast-roaming enable
        set external-fast-roaming disable
        set mesh-backhaul disable
        set max-clients 0
        set ssid "Domain Int"
        set broadcast-ssid enable
        set security wpa2-only-personal
        set pmf disable
        set voice-enterprise disable
        set fast-bss-transition disable
        set radius-mac-auth disable
        set encrypt AES
        set intra-vap-privacy disable
        set schedule "always"
        set ldpc rxtx
        set mpsk disable
        set local-standalone disable
        set local-bridging enable
        set local-authentication disable
        set vlanid 0
        set multicast-rate 0
        set multicast-enhance disable
        unset broadcast-suppression
        set me-disable-thresh 32
        set probe-resp-suppression disable
        set vlan-pooling disable
        set gtk-rekey disable
        set qos-profile ''
        unset rates-11a
        unset rates-11bg
        unset rates-11n-ss12
        unset rates-11n-ss34
        unset rates-11ac-ss12
        unset rates-11ac-ss34
        set passphrase ENC [Nope]
    next
end
config system switch-interface
    edit "lan"
        set vdom "root"
        set member "internal"
        set type switch
        set intra-switch-policy implicit
        set span disable
    next
end
config system lte-modem
    set status disable
    set extra-init ''
    set authtype none
    set apn ''
    set modem-port 255
end
config system interface
    edit "wan1"
        set vdom "root"
        set fortilink disable
        set mode dhcp
        set distance 5
        set priority 0
        set dhcp-relay-service disable
        set allowaccess ping fgfm
        set fail-detect disable
        set arpforward enable
        set broadcast-forward disable
        set bfd global
        set l2forward disable
        set icmp-redirect enable
        set vlanforward disable
        set stpforward disable
        set ips-sniffer-mode disable
        set ident-accept disable
        set ipmac disable
        set subst disable
        set substitute-dst-mac 00:00:00:00:00:00
        set status up
        set netbios-forward disable
        set wins-ip 0.0.0.0
        set type physical
        set netflow-sampler disable
        set sflow-sampler disable
        set scan-botnet-connections block
        set src-check enable
        set sample-rate 2000
        set polling-interval 20
        set sample-direction both
        set explicit-web-proxy disable
        set explicit-ftp-proxy disable
        set proxy-captive-portal disable
        set tcp-mss 0
        set inbandwidth 0
        set outbandwidth 0
        set spillover-threshold 0
        set ingress-spillover-threshold 0
        set weight 0
        set external disable
        set description ''
        set alias ''
        set l2tp-client disable
        set security-mode none
        set device-identification disable
        set fortiheartbeat disable
        set estimated-upstream-bandwidth 0
        set estimated-downstream-bandwidth 0
        set vrrp-virtual-mac disable
        set role wan
        set snmp-index 1
        set preserve-session-route disable
        set auto-auth-extension-device disable
        set ap-discover enable
        config ipv6
            set ip6-mode static
            set nd-mode basic
            unset ip6-allowaccess
            set ip6-reachable-time 0
            set ip6-retrans-time 0
            set ip6-hop-limit 0
            set dhcp6-prefix-delegation disable
            set dhcp6-information-request disable
            set ip6-address ::/0
            set ip6-send-adv disable
            set autoconf disable
            set dhcp6-relay-service disable
        end
        set dhcp-client-identifier ''
        set defaultgw enable
        set dns-server-override enable
        set speed auto
        set mtu-override disable
        set wccp disable
        set drop-overlapped-fragment disable
        set drop-fragment disable
    next
    edit "wan2"
        set vdom "root"
        set fortilink disable
        set mode dhcp
        set distance 5
        set priority 0
        set dhcp-relay-service disable
        set allowaccess ping capwap
        set fail-detect disable
        set arpforward enable
        set broadcast-forward disable
        set bfd global
        set l2forward disable
        set icmp-redirect enable
        set vlanforward disable
        set stpforward disable
        set ips-sniffer-mode disable
        set ident-accept disable
        set ipmac disable
        set subst disable
        set substitute-dst-mac 00:00:00:00:00:00
        set status up
        set netbios-forward disable
        set wins-ip 0.0.0.0
        set type physical
        set netflow-sampler disable
        set sflow-sampler disable
        set scan-botnet-connections disable
        set src-check enable
        set sample-rate 2000
        set polling-interval 20
        set sample-direction both
        set explicit-web-proxy disable
        set explicit-ftp-proxy disable
        set proxy-captive-portal disable
        set tcp-mss 0
        set inbandwidth 0
        set outbandwidth 0
        set spillover-threshold 0
        set ingress-spillover-threshold 0
        set weight 0
        set external disable
        set description ''
        set alias ''
        set l2tp-client disable
        set security-mode none
        set device-identification disable
        set fortiheartbeat disable
        set estimated-upstream-bandwidth 0
        set estimated-downstream-bandwidth 0
        set vrrp-virtual-mac disable
        set role undefined
        set snmp-index 2
        set preserve-session-route disable
        set auto-auth-extension-device disable
        set ap-discover enable
        set fortilink-stacking enable
        config ipv6
            set ip6-mode static
            set nd-mode basic
            unset ip6-allowaccess
            set ip6-reachable-time 0
            set ip6-retrans-time 0
            set ip6-hop-limit 0
            set dhcp6-prefix-delegation disable
            set dhcp6-information-request disable
            set ip6-address ::/0
            set ip6-send-adv disable
            set autoconf disable
            set dhcp6-relay-service disable
        end
        set dhcp-client-identifier ''
        set defaultgw enable
        set dns-server-override enable
        set speed auto
        set mtu-override disable
        set wccp disable
        set drop-overlapped-fragment disable
        set drop-fragment disable
    next
    edit "dmz"
        set vdom "root"
        set fortilink disable
        set mode static
        set dhcp-relay-service disable
        set ip 192.168.250.1 255.255.255.248
        set allowaccess ping capwap
        set fail-detect disable
        set pptp-client disable
        set arpforward enable
        set broadcast-forward disable
        set bfd global
        set l2forward disable
        set icmp-redirect enable
        set vlanforward disable
        set stpforward disable
        set ips-sniffer-mode disable
        set ident-accept disable
        set ipmac disable
        set subst disable
        set substitute-dst-mac 00:00:00:00:00:00
        set status down
        set netbios-forward disable
        set wins-ip 0.0.0.0
        set type physical
        set netflow-sampler disable
        set sflow-sampler disable
        set scan-botnet-connections block
        set src-check enable
        set sample-rate 2000
        set polling-interval 20
        set sample-direction both
        set explicit-web-proxy disable
        set explicit-ftp-proxy disable
        set proxy-captive-portal disable
        set tcp-mss 0
        set inbandwidth 0
        set outbandwidth 0
        set spillover-threshold 0
        set ingress-spillover-threshold 0
        set weight 0
        set external disable
        set description ''
        set alias ''
        set l2tp-client disable
        set security-mode none
        set device-identification enable
        set device-user-identification enable
        set device-access-list ''
        set lldp-transmission vdom
        set fortiheartbeat disable
        set estimated-upstream-bandwidth 0
        set estimated-downstream-bandwidth 0
        set vrrp-virtual-mac disable
        set role undefined
        set snmp-index 3
        set secondary-IP disable
        set preserve-session-route disable
        set auto-auth-extension-device disable
        set ap-discover enable
        set fortilink-stacking enable
        config ipv6
            set ip6-mode static
            set nd-mode basic
            unset ip6-allowaccess
            set ip6-reachable-time 0
            set ip6-retrans-time 0
            set ip6-hop-limit 0
            set dhcp6-prefix-delegation disable
            set dhcp6-information-request disable
            set ip6-address ::/0
            set ip6-send-adv disable
            set autoconf disable
            set dhcp6-relay-service disable
        end
        set speed auto
        set mtu-override disable
        set wccp disable
        set drop-overlapped-fragment disable
        set drop-fragment disable
    next
    edit "modem"
        set vdom "root"
        set fortilink disable
        set mode pppoe
        set distance 5
        set priority 0
        set dhcp-relay-service disable
        unset allowaccess
        set arpforward enable
        set broadcast-forward disable
        set l2forward disable
        set vlanforward disable
        set stpforward disable
        set ips-sniffer-mode disable
        set ident-accept disable
        set ipmac disable
        set subst disable
        set substitute-dst-mac 00:00:00:00:00:00
        set netbios-forward disable
        set wins-ip 0.0.0.0
        set type physical
        set netflow-sampler disable
        set sflow-sampler disable
        set scan-botnet-connections disable
        set src-check enable
        set sample-rate 2000
        set polling-interval 20
        set sample-direction both
        set proxy-captive-portal disable
        set tcp-mss 0
        set spillover-threshold 0
        set ingress-spillover-threshold 0
        set weight 0
        set external disable
        set security-mode none
        set device-identification disable
        set fortiheartbeat disable
        set estimated-upstream-bandwidth 0
        set estimated-downstream-bandwidth 0
        set vrrp-virtual-mac disable
        set role undefined
        set snmp-index 6
        set preserve-session-route disable
        set auto-auth-extension-device disable
        set ap-discover enable
        set ipunnumbered 0.0.0.0
        set username ''
        set password ENC [Nope]
        set idle-timeout 0
        set disc-retry-timeout 1
        set padt-retry-timeout 1
        set service-name ''
        set ac-name ''
        set lcp-echo-interval 5
        set lcp-max-echo-fails 3
        set defaultgw enable
        set dns-server-override enable
        set auth-type auto
        set mtu-override disable
        set wccp disable
        set drop-overlapped-fragment disable
        set drop-fragment disable
    next
    edit "wifi"
        set vdom "root"
        set mode static
        set dhcp-relay-service disable
        set ip 192.168.7.1 255.255.255.0
        unset allowaccess
        set pptp-client disable
        set arpforward enable
        set broadcast-forward disable
        set bfd global
        set l2forward disable
        set icmp-redirect enable
        set vlanforward disable
        set stpforward disable
        set ips-sniffer-mode disable
        set ident-accept disable
        set ipmac disable
        set status up
        set netbios-forward disable
        set wins-ip 0.0.0.0
        set type vap-switch
        set netflow-sampler disable
        set sflow-sampler disable
        set scan-botnet-connections disable
        set src-check enable
        set sample-rate 2000
        set polling-interval 20
        set sample-direction both
        set explicit-web-proxy disable
        set explicit-ftp-proxy disable
        set proxy-captive-portal disable
        set tcp-mss 0
        set inbandwidth 0
        set outbandwidth 0
        set ingress-spillover-threshold 0
        set external disable
        set description ''
        set alias ''
        set l2tp-client disable
        set device-identification enable
        set device-user-identification enable
        set device-access-list ''
        set fortiheartbeat disable
        set estimated-upstream-bandwidth 0
        set estimated-downstream-bandwidth 0
        set role lan
        set snmp-index 9
        set secondary-IP disable
        set preserve-session-route disable
        config ipv6
            set ip6-mode static
            set nd-mode basic
            unset ip6-allowaccess
            set ip6-reachable-time 0
            set ip6-retrans-time 0
            set ip6-hop-limit 0
            set dhcp6-prefix-delegation disable
            set dhcp6-information-request disable
            set ip6-address ::/0
            set ip6-send-adv disable
            set autoconf disable
            set dhcp6-relay-service disable
        end
        set macaddr 00:00:00:00:00:00
        set mtu-override disable
    next
    edit "lan"
        set vdom "root"
        set fortilink disable
        set mode static
        set dhcp-relay-service disable
        set ip 10.1.19.100 255.255.255.0
        set allowaccess ping https ssh http fgfm capwap
        set pptp-client disable
        set arpforward enable
        set broadcast-forward disable
        set bfd global
        set l2forward disable
        set icmp-redirect enable
        set vlanforward disable
        set stpforward disable
        set ips-sniffer-mode disable
        set ident-accept disable
        set ipmac disable
        set subst disable
        set substitute-dst-mac 00:00:00:00:00:00
        set status up
        set netbios-forward disable
        set wins-ip 0.0.0.0
        set type switch
        set netflow-sampler disable
        set sflow-sampler disable
        set scan-botnet-connections block
        set src-check enable
        set sample-rate 2000
        set polling-interval 20
        set sample-direction both
        set explicit-web-proxy disable
        set explicit-ftp-proxy disable
        set proxy-captive-portal disable
        set tcp-mss 0
        set inbandwidth 0
        set outbandwidth 0
        set spillover-threshold 0
        set ingress-spillover-threshold 0
        set weight 0
        set external disable
        set description ''
        set alias ''
        set l2tp-client disable
        set security-mode none
        set device-identification enable
        set device-user-identification enable
        set device-access-list ''
        set lldp-transmission vdom
        set fortiheartbeat disable
        set estimated-upstream-bandwidth 0
        set estimated-downstream-bandwidth 0
        set vrrp-virtual-mac disable
        set role lan
        set snmp-index 10
        set secondary-IP disable
        set preserve-session-route disable
        set auto-auth-extension-device disable
        set ap-discover enable
        set fortilink-stacking enable
        config ipv6
            set ip6-mode static
            set nd-mode basic
            unset ip6-allowaccess
            set ip6-reachable-time 0
            set ip6-retrans-time 0
            set ip6-hop-limit 0
            set dhcp6-prefix-delegation disable
            set dhcp6-information-request disable
            set ip6-address ::/0
            set ip6-send-adv disable
            set autoconf disable
            set dhcp6-relay-service disable
        end
        set mtu-override disable
        set wccp disable
        set drop-overlapped-fragment disable
        set drop-fragment disable
    next
    edit "internal"
        set vdom "root"
        set fortilink disable
        set priority 0
        set pptp-client disable
        set arpforward enable
        set bfd global
        set l2forward disable
        set vlanforward disable
        set stpforward disable
        set ips-sniffer-mode disable
        set subst disable
        set status up
        set type hard-switch
        set netflow-sampler disable
        set sflow-sampler disable
        set scan-botnet-connections disable
        set src-check enable
        set sample-rate 2000
        set polling-interval 20
        set sample-direction both
        set explicit-web-proxy disable
        set explicit-ftp-proxy disable
        set proxy-captive-portal disable
        set inbandwidth 0
        set outbandwidth 0
        set spillover-threshold 0
        set ingress-spillover-threshold 0
        set external disable
        set description ''
        set alias ''
        set security-mode none
        set stp enable
        set stp-ha-slave priority-adjust
        set lldp-transmission vdom
        set estimated-upstream-bandwidth 0
        set estimated-downstream-bandwidth 0
        set role undefined
        set snmp-index 8
        set preserve-session-route disable
        set ap-discover enable
        set dhcp-client-identifier ''
        set mtu-override disable
        set wccp disable
        set drop-overlapped-fragment disable
        set drop-fragment disable
        config l2tp-client-settings
            set user ''
            set password ENC [Nope]
            set peer-host ''
            set peer-mask 255.255.255.255
            set peer-port 1701
            set auth-type auto
            set mtu 1460
            set distance 2
            set priority 0
            set defaultgw disable
        end
    next
    edit "Local LAN"
        set vdom "root"
        set mode static
        set dhcp-relay-service disable
        set ip 192.168.1.1 255.255.255.0
        set allowaccess ping https snmp http
        set fail-detect disable
        set pptp-client disable
        set arpforward enable
        set broadcast-forward disable
        set bfd global
        set l2forward disable
        set icmp-redirect enable
        set vlanforward disable
        set stpforward disable
        set ips-sniffer-mode disable
        set ident-accept disable
        set ipmac disable
        set subst disable
        set substitute-dst-mac 00:00:00:00:00:00
        set status up
        set netbios-forward disable
        set wins-ip 0.0.0.0
        set type vlan
        set netflow-sampler disable
        set sflow-sampler disable
        set scan-botnet-connections disable
        set src-check enable
        set sample-rate 2000
        set polling-interval 20
        set sample-direction both
        set explicit-web-proxy disable
        set explicit-ftp-proxy disable
        set proxy-captive-portal disable
        set tcp-mss 0
        set inbandwidth 0
        set outbandwidth 0
        set spillover-threshold 0
        set ingress-spillover-threshold 0
        set weight 0
        set external disable
        set description ''
        set alias ''
        set l2tp-client disable
        set security-mode none
        set device-identification enable
        set device-user-identification enable
        set device-access-list ''
        set fortiheartbeat disable
        set estimated-upstream-bandwidth 0
        set estimated-downstream-bandwidth 0
        set vrrp-virtual-mac disable
        set role lan
        set snmp-index 4
        set secondary-IP disable
        set preserve-session-route disable
        set ap-discover enable
        set color 0
        config ipv6
            set ip6-mode static
            set nd-mode basic
            unset ip6-allowaccess
            set ip6-reachable-time 0
            set ip6-retrans-time 0
            set ip6-hop-limit 0
            set dhcp6-prefix-delegation disable
            set dhcp6-information-request disable
            set ip6-address ::/0
            set ip6-send-adv disable
            set autoconf disable
            set dhcp6-relay-service disable
        end
        set mtu-override disable
        set wccp disable
        set drop-overlapped-fragment disable
        set drop-fragment disable
        set interface "lan"
        set vlanid 10
    next
    edit "WIRLESS"
        set vdom "root"
        set mode static
        set dhcp-relay-service disable
        set ip 172.16.1.1 255.255.255.0
        set allowaccess ping https snmp http
        set fail-detect disable
        set pptp-client disable
        set arpforward enable
        set broadcast-forward disable
        set bfd global
        set l2forward disable
        set icmp-redirect enable
        set vlanforward disable
        set stpforward disable
        set ips-sniffer-mode disable
        set ident-accept disable
        set ipmac disable
        set subst disable
        set substitute-dst-mac 00:00:00:00:00:00
        set status up
        set netbios-forward disable
        set wins-ip 0.0.0.0
        set type vlan
        set netflow-sampler disable
        set sflow-sampler disable
        set scan-botnet-connections disable
        set src-check enable
        set sample-rate 2000
        set polling-interval 20
        set sample-direction both
        set explicit-web-proxy disable
        set explicit-ftp-proxy disable
        set proxy-captive-portal disable
        set tcp-mss 0
        set inbandwidth 0
        set outbandwidth 0
        set spillover-threshold 0
        set ingress-spillover-threshold 0
        set weight 0
        set external disable
        set description ''
        set alias ''
        set l2tp-client disable
        set security-mode none
        set device-identification enable
        set device-user-identification enable
        set device-access-list ''
        set fortiheartbeat disable
        set estimated-upstream-bandwidth 0
        set estimated-downstream-bandwidth 0
        set vrrp-virtual-mac disable
        set role lan
        set snmp-index 5
        set secondary-IP disable
        set preserve-session-route disable
        set ap-discover enable
        set color 0
        config ipv6
            set ip6-mode static
            set nd-mode basic
            unset ip6-allowaccess
            set ip6-reachable-time 0
            set ip6-retrans-time 0
            set ip6-hop-limit 0
            set dhcp6-prefix-delegation disable
            set dhcp6-information-request disable
            set ip6-address ::/0
            set ip6-send-adv disable
            set autoconf disable
            set dhcp6-relay-service disable
        end
        set mtu-override disable
        set wccp disable
        set drop-overlapped-fragment disable
        set drop-fragment disable
        set interface "lan"
        set vlanid 172
    next
    edit "Internal"
        set vdom "root"
        set mode static
        set dhcp-relay-service disable
        set ip 0.0.0.0 0.0.0.0
        unset allowaccess
        set pptp-client disable
        set arpforward enable
        set broadcast-forward disable
        set bfd global
        set l2forward disable
        set icmp-redirect enable
        set vlanforward disable
        set stpforward disable
        set ips-sniffer-mode disable
        set ident-accept disable
        set ipmac disable
        set status up
        set netbios-forward disable
        set wins-ip 0.0.0.0
        set type vap-switch
        set netflow-sampler disable
        set sflow-sampler disable
        set scan-botnet-connections disable
        set src-check enable
        set sample-rate 2000
        set polling-interval 20
        set sample-direction both
        set explicit-web-proxy disable
        set explicit-ftp-proxy disable
        set proxy-captive-portal disable
        set tcp-mss 0
        set inbandwidth 0
        set outbandwidth 0
        set ingress-spillover-threshold 0
        set external disable
        set description ''
        set alias ''
        set l2tp-client disable
        set device-identification disable
        set fortiheartbeat disable
        set estimated-upstream-bandwidth 0
        set estimated-downstream-bandwidth 0
        set role lan
        set snmp-index 12
        set secondary-IP disable
        set preserve-session-route disable
        config ipv6
            set ip6-mode static
            set nd-mode basic
            unset ip6-allowaccess
            set ip6-reachable-time 0
            set ip6-retrans-time 0
            set ip6-hop-limit 0
            set dhcp6-prefix-delegation disable
            set dhcp6-information-request disable
            set ip6-address ::/0
            set ip6-send-adv disable
            set autoconf disable
            set dhcp6-relay-service disable
        end
        set macaddr 00:00:00:00:00:00
        set mtu-override disable
    next
end
config system physical-switch
    edit "sw0"
        set age-enable disable
        set age-val 0
    next
end
config system virtual-switch
    edit "internal"
        set physical-switch "sw0"
        set span disable
        config port
            edit "internal1"
                set speed auto
                set status up
                set alias ''
            next
            edit "internal2"
                set speed auto
                set status up
                set alias ''
            next
            edit "internal3"
                set speed auto
                set status up
                set alias ''
            next
            edit "internal4"
                set speed auto
                set status up
                set alias ''
            next
            edit "internal5"
                set speed auto
                set status up
                set alias ''
            next
            edit "internal6"
                set speed auto
                set status up
                set alias ''
            next
            edit "internal7"
                set speed auto
                set status up
                set alias ''
            next
        end
    next
end
post edited by epc.tech - 2019/06/12 09:43:57
#1
epc.tech
New Member
  • Total Posts : 3
  • Scores: 0
  • Reward points: 0
  • Joined: 2019/06/11 13:24:35
  • Status: offline
Re: SSID Not Broadcasting 2019/06/20 09:59:58 (permalink)
0
Solved my problem, I'm looking at expanding our network. Do the access points need PoE, specifically FAP-221E? Or can I plug them into an outlet and run the ethernet from a non-PoE switch?
#2
bravishank_FTNT
Bronze Member
  • Total Posts : 22
  • Scores: 1
  • Reward points: 0
  • Joined: 2013/05/14 12:25:38
  • Status: offline
Re: SSID Not Broadcasting 2019/06/20 10:05:38 (permalink) ☼ Best Answerby epc.tech 2019/06/20 10:32:41
0
FAP221E supports PoE. It can also be powered up via External Power Source and you can the Ethernet via Non-PoE Switch. 
 
 
#3
Jump to:
© 2019 APG vNext Commercial Version 5.5