Hot!Logged in to fortinet's base with the rsh command

Author
milly
New Member
  • Total Posts : 2
  • Scores: 0
  • Reward points: 0
  • Joined: 2019/06/09 07:59:27
  • Status: offline
2019/06/09 08:24:08 (permalink) 5.4
0

Logged in to fortinet's base with the rsh command

Hi all!
When I monitor office fortigate 50e (v5.4.8,build1183GA), I often check the log that is logged in to fortinet's base with the rsh command. It is about 10 times a minute. Is this normal?
Best regards

Attached Image(s)

#1

2 Replies Related Threads

    ede_pfau
    Expert Member
    • Total Posts : 6019
    • Scores: 480
    • Reward points: 0
    • Joined: 2004/03/09 01:20:18
    • Location: Heidelberg, Germany
    • Status: offline
    Re: Logged in to fortinet's base with the rsh command 2019/06/09 13:13:27 (permalink)
    0
    I'd say no. What you can expect is attempts to the SSH port, and the HTTPS port, if you have mgmt ports open on the WAN port.
    Might be you have RSH open on a VIP?

    Ede

    " Kernel panic: Aiee, killing interrupt handler!"
    #2
    milly
    New Member
    • Total Posts : 2
    • Scores: 0
    • Reward points: 0
    • Joined: 2019/06/09 07:59:27
    • Status: offline
    Re: Logged in to fortinet's base with the rsh command 2019/06/09 20:49:43 (permalink)
    0
    Hi Ede!
    Thank you for your kind reply.
    I was surprised that It is using RSH.
    I am not opening RSH with VIP.
    Since the time when the management of the former office foritigate manager was not good for a long time, I confirm whether there is any trouble.
    Should I suspect the possibility of being a springboard?
    Best regards.
     
    milly.
    #3
    Jump to:
    © 2019 APG vNext Commercial Version 5.5