Hot!FVE Auto Discovery

Author
BryanS
New Member
  • Total Posts : 13
  • Scores: 0
  • Reward points: 0
  • Joined: 2016/08/10 00:45:08
  • Status: offline
2019/04/24 14:58:30 (permalink)
0

FVE Auto Discovery

I have an FVE 300 and have found it will not auto-discover any new handsets for over 90 mins.  After that time, they do get discovered and configuration happens quickly after.

I just can't figure out why it takes this long.  Has anyone had this happen?
 
The phones are 375s and they get the IP and VLAN info immediately.  They are accessible on the web portal for the phone as well, just the auto discovery via Status > Phone System > Unassigned Phone - will not see them.
#1

2 Replies Related Threads

    stherrien
    New Member
    • Total Posts : 1
    • Scores: 0
    • Reward points: 0
    • Joined: 2018/03/21 05:17:35
    • Status: offline
    Re: FVE Auto Discovery 2019/04/25 05:13:25 (permalink)
    0
    The latest MAC address for 375 phone are missing in some firmware version.
    Add the 375 MAc address to the phone system
    post edited by stherrien - 2019/04/25 05:35:45

    Attached Image(s)

    #2
    BryanS
    New Member
    • Total Posts : 13
    • Scores: 0
    • Reward points: 0
    • Joined: 2016/08/10 00:45:08
    • Status: offline
    Re: FVE Auto Discovery 2019/04/26 16:42:05 (permalink)
    0
    The address was in the system, still no change.
     
    I started adding my 570 phones, they come right up.  Tried another 345, they took almost 95 mins to be discovered.
    #3
    Jump to:
    © 2019 APG vNext Commercial Version 5.5