Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
sims
New Contributor III

policy basic

Hi,

 

For the below policy , NO NAT , what are the routing required ? 

 

Policy basic

 

From  Interface : Inside  10.0.2.1

 

To Interface  : outside  192.168.100.100

 

source :  192.168.2.100

 

Dest : 192.168.8.100    

 

 

 

Thanks

 

2 REPLIES 2
ede_pfau
Esteemed Contributor III

You need a static route like this:

destination 192.168.8.0/24 (whole subnet) or 192.168.8.100/32 (host only)

interface: outside

gateway: 192.168.100.xxx - IP address of the next router on the outside subnet

leave distance at 10

 

 


Ede

"Kernel panic: Aiee, killing interrupt handler!"
Ede"Kernel panic: Aiee, killing interrupt handler!"
sw2090
Honored Contributor

additionally:

 

if your FGT does have a physical,logical or vlan interface in each of the two subnets you don't need top set up any routes because in this case you already have them via those interfaces with setting up the interfaces.

-- 

"It is a mistake to think you can solve any major problems just with potatoes." - Douglas Adams

-- "It is a mistake to think you can solve any major problems just with potatoes." - Douglas Adams
Labels
Top Kudoed Authors