Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
MERANA
New Contributor

Multiple VIP question

I have a below scenario but not sure how to deal with it I am using V6 OS of fortigate firewall.

 

I have DMZ,LAN, WAN interfaces

for a web server I need to define VIP which have specific port requriements.

 

DMZ Access requirement:

For example:

ext:80.80.80.1 Map:10.10.10.1 Orig-service:4443 map-service:443

ext:80.80.80.1 Map:10.10.10.1 Orig-service:80 map-service:8080

 

WAN access Requirements:

ext:80.80.80.1 Map:10.10.10.1 Orig-service:443 map-service:4443

ext:80.80.80.1 Map:10.10.10.1 Orig-service:2222 map-service:22

 

LAN access requirements:

ext:80.80.80.1 Map:10.10.10.1 Orig-service:any map-service:any

 

Problem now I am able to create above DMZ and WAN Vip combinations but not allowing me to create vip without port-forward option enable and saying duplicate exist when i turnoff the port-forward option in VIP just to create as a simple VIP.

 

Please can someone help me how to deal with this situation as I have lots of rules which require config to use as any service.but it won't let me create as can't specify VIP without port due top above VIP's created.

 

 

7 REPLIES 7
MERANA
New Contributor

anyone ?

DonConsolio
New Contributor

You can either use port forwarding and redirect ports as you like and even multiple source/destination ports per IP-address pair or you can forward all ports for an ip pair, but then you can't control the ports individually.

 

Your use case looks very much like a case for port forwarding to me.

 

Dave_Hall

What does the ext 80.80.80.1 and Map:10.10.10.1 represent?  Is 80.80.80.1 the outside pubic IP for the web server? Is 10.10.10.1 the inside private IP address for same server?  And where does this Web server actually located?  (Behind the fgt?)

 

 

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
MERANA

yes 80 address representing external address. showed it as a exemplary way....

 

Also once use static one to one vip for a particular subnet can't specify subnet to subnet vip so very restrictive.

Dave_Hall
Honored Contributor

So what does the 10.10.10.1 represents?  Is there a 10.10.10.x subnet?  IF so, which interface is it on?  Or is this IP made up?

 

If this website has a resolveable DNS name, you might want to look into setting up DNS translation.

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
MERANA

as explained its a made up IP just to make one understand the situation. its represending internal address and currently all vip set to any.

Dave_Hall
Honored Contributor

Sounds like you want to configure Hair-pinning - if that link doesn't work try this one.

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
Labels
Top Kudoed Authors