Hot!Stacking two Fortiswitch 524D as one unit

New Member
  • Total Posts : 1
  • Scores: 0
  • Reward points: 0
  • Joined: 2019/01/17 12:46:36
  • Status: offline
2019/01/17 13:10:52 (permalink)

Stacking two Fortiswitch 524D as one unit

Hi all,
can enyone help with configuring standalone stack with 2 FS-524D. I use two 40G QSFP cabes to connect both switches.
OS - 6.0.2
I would like to achive as written under MCLAG (page 94):
A multichassis LAG (MCLAG) provides node-level redundancy by grouping two FortiSwitch models together so that they appear as a single switch on the network.
As suggested I configure:
config switch trunk
edit "MCLAG-ICL-trunk"
set mclag-icl enable
set members "port29" "port30"
set mode lacp-active
Trunk is configured O.K but still I can't see FS as one unit (maybe something is still missing in configuration).
My question is how to configure the switch to be seen as one unit and when Stacking ID LED and "stack" LED will turn on on front panel?
Thank you,

0 Replies Related Threads

    Jump to:
    © 2019 APG vNext Commercial Version 5.5