AnsweredHot!SD WAN setup issue

Author
jase888
Bronze Member
  • Total Posts : 25
  • Scores: 2
  • Reward points: 0
  • Joined: 2018/10/04 01:58:11
  • Status: offline
2019/01/08 03:35:17 (permalink)
0

SD WAN setup issue

I am setting up a Fortigate 60E with SD WAN for failover/load balance but running into an issue.
 
I have 2 WANs connected and both work individually with my ipv4 policy if I switch between them, so I know the WANS are setup correct including the static routes. When I add them into SD-WAN and then set my ipv4 to use the SD WAN I have no internet at all. I feel I must be missing something obvious but I've followed the guides I've seen like this
 
Any ideas would be appreciated
#1
BrUz
Gold Member
  • Total Posts : 399
  • Scores: 8
  • Reward points: 0
  • Joined: 2011/09/30 01:26:25
  • Location: Norway
  • Status: offline
Re: SD WAN setup issue 2019/01/08 03:42:47 (permalink)
0
You have also set up policy against the SD-WAN interface
 

Fortigate <3
#2
jase888
Bronze Member
  • Total Posts : 25
  • Scores: 2
  • Reward points: 0
  • Joined: 2018/10/04 01:58:11
  • Status: offline
Re: SD WAN setup issue 2019/01/08 03:49:12 (permalink)
0
I have setup a  LAN to SD WAN IPv4 policy the same as I had for WAN 1 or WAN 2 but it now uses SD-WAN as outgoing interface
post edited by jase888 - 2019/01/08 03:56:23
#3
BrUz
Gold Member
  • Total Posts : 399
  • Scores: 8
  • Reward points: 0
  • Joined: 2011/09/30 01:26:25
  • Location: Norway
  • Status: offline
Re: SD WAN setup issue 2019/01/08 03:56:20 (permalink)
0
Yes
 
Are your dns correct, can you send ping to 8.8.8.8?

Fortigate <3
#4
jase888
Bronze Member
  • Total Posts : 25
  • Scores: 2
  • Reward points: 0
  • Joined: 2018/10/04 01:58:11
  • Status: offline
Re: SD WAN setup issue 2019/01/08 04:09:33 (permalink)
0
yeah it does seem like a DNS related issue, but the SD-WAN Status Checks is setup to ping 8.8.8.8 and it appears to be working. However I cant ping anything external including 8.8.8.8 from a client attached to it when im on the SDWAN so bit lost
#5
BrUz
Gold Member
  • Total Posts : 399
  • Scores: 8
  • Reward points: 0
  • Joined: 2011/09/30 01:26:25
  • Location: Norway
  • Status: offline
Re: SD WAN setup issue 2019/01/08 04:12:17 (permalink) ☼ Best Answerby jase888 2019/01/08 06:05:43
5 (1)
pls check your routes

Fortigate <3
#6
jase888
Bronze Member
  • Total Posts : 25
  • Scores: 2
  • Reward points: 0
  • Joined: 2018/10/04 01:58:11
  • Status: offline
Re: SD WAN setup issue 2019/01/08 06:05:35 (permalink)
5 (1)
thanks - it was the routes I though leaving both wan routes in was correct but needed to chnage it so it only had the SD WAN Route
#7
Jump to:
© 2019 APG vNext Commercial Version 5.5