Hot!Traffic shaper on policy

Author
MArchito
New Member
  • Total Posts : 1
  • Scores: 0
  • Reward points: 0
  • Joined: 2018/12/03 10:51:54
  • Status: offline
2018/12/03 11:16:43 (permalink)
0

Traffic shaper on policy

Why i cant see a Traffic shaper on a policy?
 
 

Attached Image(s)

#1

3 Replies Related Threads

    Toshi Esumi
    Expert Member
    • Total Posts : 1259
    • Scores: 89
    • Reward points: 0
    • Joined: 2014/11/06 09:56:42
    • Status: offline
    Re: Traffic shaper on policy 2018/12/03 15:36:25 (permalink)
    5 (1)
    I don't know what version you're running. But at least with 5.6.x, when you create traffic shapers in GUI, you need to apply them to shaping-policies under "Traffic Shaping Policy". Not at IPv4/v6 Policy.
    #2
    Fullmoon
    Platinum Member
    • Total Posts : 804
    • Scores: 9
    • Reward points: 0
    • Joined: 2010/08/02 18:02:10
    • Status: offline
    Re: Traffic shaper on policy 2018/12/03 17:04:11 (permalink)
    5 (1)
    TS is no longer in firewall policy and its has its own menu in the gui. Or else under System>Feature Visibility>Traffic Shaping (enable the toggle button)
     

    Fortigate Newbie
    #3
    hnmr
    New Member
    • Total Posts : 10
    • Scores: 0
    • Reward points: 0
    • Joined: 2014/10/21 02:52:59
    • Status: offline
    Re: Traffic shaper on policy 2018/12/05 07:00:02 (permalink)
    0
    In at least 5.6 you see traffic-shaper's settings in a firewall policy only, if you have enabled it on CLI or it was enabled it before updating to 5.6 from any earlier version. 
     
    To assign traffic-shapers to a firewall policy, you need to issue a set command on CLI directly. After that the setting will show up in GUI too.
     
    This may be the way Fortinet wants us to move from traffic-shaping in firewall policies to traffic-shaping policies. If their implementation of traffic-shaping polciies wouldn't be that incomplete, I would appreciate the idea.
    #4
    Jump to:
    © 2018 APG vNext Commercial Version 5.5