Hot!Routing application traffic through backup WAN with existing static route

Author
Post
Essentials Only Full Version
JT3
New Member
  • Total Posts : 2
  • Scores: 0
  • Reward points: 0
  • Joined: 2018/11/15 11:34:01
  • Status: offline
2018/11/15 11:39:24 (permalink) 6.0
0

Routing application traffic through backup WAN with existing static route

I have redundancy set up per this article on a 60E running 6.02  https://cookbook.fortinet.com/redundant-internet-basic-failover-56/
 
We use Crashplan Pro for our backup solution.  I would like to route all of that traffic over the backup wan link instead of the primary. 
 
How can I accomplish this?
 
Thank you.
#1

1 Reply Related Threads
    JT3
    New Member
    • Total Posts : 2
    • Scores: 0
    • Reward points: 0
    • Joined: 2018/11/15 11:34:01
    • Status: offline
    Re: Routing application traffic through backup WAN with existing static route 2019/01/03 07:52:03 (permalink)
    0
    I figured it out.
     
    First, go to Policy & Objects -> Addresses
    Create address(s) for the destinations, and enable static route radio
    Then create an address group
    Then go to Network -> Static Routes
    Create a new static route, then select "named address'
    Group as destination.  
    Gateway 0.0.0.0
    Interface of the backup wan connection
    Enable it.  That's it.  All is well in the world
    #2
    Jump to:
    © 2019 APG vNext Commercial Version 5.5