Hot!WAN packet loss rate

Author
one.co.il
Bronze Member
  • Total Posts : 21
  • Scores: 0
  • Reward points: 0
  • Joined: 2013/01/06 06:11:33
  • Status: offline
2018/11/07 13:52:31 (permalink)
0

WAN packet loss rate

Hi
I'm using FG 100D
is there any way to monitor my wan for packet lost?
i'm suspecting my main WAN is not stable sometimes,
i would like to monitor packet lost Live and log it if possible
 
#1

5 Replies Related Threads

    Dave Hall
    Expert Member
    • Total Posts : 1274
    • Scores: 120
    • Reward points: 0
    • Joined: 2012/05/11 07:55:58
    • Location: Canada
    • Status: offline
    Re: WAN packet loss rate 2018/11/07 14:26:13 (permalink)
    0
    From the CLI type diag hardware deviceinfo nic <interface name>
     
    eg.
     
    # diag hardware deviceinfo nic wan1
    Driver Name     :Fortinet NP4Lite Driver
    Version         :1.0.1
    Admin           :up
    Current_HWaddr   08:5b:0e:6e:cb:40
    Permanent_HWaddr 08:5b:0e:6e:cb:40
    Status          :down
    Speed           :10
    Duplex          :Half
    Host Rx Pkts    :0
    Host Rx Bytes   :0
    Host Tx Pkts    :0
    Host Tx Bytes   :0
    Rx Pkts         :0
    Rx Bytes        :0
    Tx Pkts         :0
    Tx Bytes        :0
    rx_buffer_len   :2048
    Hidden          :No
    cmd_in_list     : 0
    promiscuous     : 1
    enabled 802.1x  : 0
    authorized      : 0
     
    Check the speed and duplex is correct.  Watch for any error counts that grow (increase) over time.

    NSE4/FMG-VM64/FortiAnalyzer-VM/5.2/5.4 (FWF40C/FW92D/FGT200B/FGT200D/FGT101E)/ FAP220B/221C
    #2
    one.co.il
    Bronze Member
    • Total Posts : 21
    • Scores: 0
    • Reward points: 0
    • Joined: 2013/01/06 06:11:33
    • Status: offline
    Re: WAN packet loss rate 2018/11/07 22:31:05 (permalink)
    0
    thanks!
    it will be very useful.
    is there any way to log the data in addition to live view?
    can i make a GUI historically graph of the data?
    #3
    Dave Hall
    Expert Member
    • Total Posts : 1274
    • Scores: 120
    • Reward points: 0
    • Joined: 2012/05/11 07:55:58
    • Location: Canada
    • Status: offline
    Re: WAN packet loss rate 2018/11/08 07:55:11 (permalink)
    0
    You'll may need to set up snmp.  According to this old forum post, the OID is listed under fg link monitor.
     
    one.co.il
    is there any way to log the data in addition to live view?
    can i make a GUI historically graph of the data?




    NSE4/FMG-VM64/FortiAnalyzer-VM/5.2/5.4 (FWF40C/FW92D/FGT200B/FGT200D/FGT101E)/ FAP220B/221C
    #4
    one.co.il
    Bronze Member
    • Total Posts : 21
    • Scores: 0
    • Reward points: 0
    • Joined: 2013/01/06 06:11:33
    • Status: offline
    Re: WAN packet loss rate 2018/11/10 11:02:13 (permalink)
    0
    this may be a silly question
    I need to setup Link monitor on my wan1 and wan2 lines?
    #5
    one.co.il
    Bronze Member
    • Total Posts : 21
    • Scores: 0
    • Reward points: 0
    • Joined: 2013/01/06 06:11:33
    • Status: offline
    Re: WAN packet loss rate 2018/11/11 23:19:05 (permalink)
    0
    Manage to get it work via GUI on LinkMonitor
    Thanks
    #6
    Jump to:
    © 2018 APG vNext Commercial Version 5.5