Hot!FortiSwitch 108D-POE failure

Author
Kjoebie
New Member
  • Total Posts : 7
  • Scores: 0
  • Reward points: 0
  • Joined: 2013/08/28 14:31:42
  • Status: offline
2018/08/30 12:33:15 (permalink)
0

FortiSwitch 108D-POE failure

Hello,
 
I rebooted my 108D-POE and now it isn't working anymore. Only port 1 shows a green light when I put a cable in it. All the other ports show a fade amber light (see picture). It does not respond when a cable is inserted.
The reset button does not work. After 10-15 seconds nothing happens. Port 1 replies to ip 192.168.1.99 but I cannot start the GUI.
 
Any ideas?
 
Regards,
Albert
 

Attached Image(s)

#1

3 Replies Related Threads

    SecurityPlus
    Gold Member
    • Total Posts : 229
    • Scores: 4
    • Reward points: 0
    • Joined: 2014/08/11 18:41:34
    • Status: offline
    Re: FortiSwitch 108D-POE failure 2018/09/01 05:37:28 (permalink)
    0
    Have you contacted Fortinet support yet concerning this issue?
    #2
    ede_pfau
    Expert Member
    • Total Posts : 5752
    • Scores: 397
    • Reward points: 0
    • Joined: 2004/03/09 01:20:18
    • Location: Heidelberg, Germany
    • Status: offline
    Re: FortiSwitch 108D-POE failure 2018/09/01 07:30:24 (permalink)
    0
    If it's got an external power supply you could test a replacement PSU. I suspect the PSU has failed. Open a support case anyway.

    Ede

    " Kernel panic: Aiee, killing interrupt handler!"
    #3
    Kjoebie
    New Member
    • Total Posts : 7
    • Scores: 0
    • Reward points: 0
    • Joined: 2013/08/28 14:31:42
    • Status: offline
    Re: FortiSwitch 108D-POE failure 2018/09/11 03:13:49 (permalink)
    0
    HI All,
     
    Thanks for the replies. I used an RMA to replace the switch.
     
    Thanks.
    Albert
    #4
    Jump to:
    © 2018 APG vNext Commercial Version 5.5