Hot!VPN Connected, remote routes are not added to the table (log & route table inside) SOLVED

Author
SuPQQ
New Member
  • Total Posts : 4
  • Scores: 0
  • Reward points: 0
  • Joined: 2018/08/12 16:38:27
  • Status: offline
2018/08/12 17:19:09 (permalink) 6.0
0

VPN Connected, remote routes are not added to the table (log & route table inside) SOLVED

Symptoms
Connection to various SSL-VPN's, except for the remote gateway's address no routes were added to the Routing Table.
Route Print before connection
http://prntscr.com/khtulk
Route Print after connection
http://prntscr.com/khtvkf
 
Edit: Appears that Forti's adapter is getting APIPA address after about half a minute into a connected VPN session.
http://prntscr.com/khx7kx
FortiClient Itself shows correct IP, the adapter shows APIPA like the image from above.https://pastebin.com/ZPstmfy6 < SSL adapter from ipconfig /all
 
Attached DebugLogFC.txt  or PasteBin is a debug level log of 2 separate remote gateways VPN connection, Connected each for about a minute and disconnected manually. These are 2 different physical FortiGates residing at different locations.
 
Probable cause: Everything worked well till a power outage occurred, FortiClient was not actively connected during it, I doubt it was even running.
Other thing that might've caused it is an installation of Tor browser (can not be certain if it worked after).
 
Tried reinstalling Forticlient, removing Tor, System Restore.
 
This tool is crucial for my work, any help would be appreciated.
 
Regards, Avi.
 
P.S - Replaced GW's addr with FortiGate #1 and #2 in log, deleted remote GW's address from Route table pic.

post edited by SuPQQ - 2018/08/13 09:17:06
#1

3 Replies Related Threads

    SuPQQ
    New Member
    • Total Posts : 4
    • Scores: 0
    • Reward points: 0
    • Joined: 2018/08/12 16:38:27
    • Status: offline
    Re: VPN Connected, remote routes are not added to the table (log & route table inside) 2018/08/13 09:14:08 (permalink)
    0
    SOLVED.
     
    Npcap Packet Driver (NPCAP) caused it on the Fortinet SSL VPN Virtual Ethernet adapter
     
    http://prntscr.com/ki4dr7
     
    Don't have a slight clue why it started acting up like that, it was installed for quiet a while and been thru few restarts IIRC. damn.
     
    #2
    hertavein
    New Member
    • Total Posts : 1
    • Scores: 0
    • Reward points: 0
    • Joined: 2019/09/17 22:30:57
    • Status: offline
    Re: VPN Connected, remote routes are not added to the table (log & route table inside) 2019/09/17 22:33:16 (permalink)
    0
     how do you say it? Relevant!! Finally
    I’ve found something which helped me.
     
    #3
    SuPQQ
    New Member
    • Total Posts : 4
    • Scores: 0
    • Reward points: 0
    • Joined: 2018/08/12 16:38:27
    • Status: offline
    Re: VPN Connected, remote routes are not added to the table (log & route table inside) 2019/09/18 11:16:18 (permalink)
    0
    Very glad it helped another person 😀
    #4
    Jump to:
    © 2019 APG vNext Commercial Version 5.5