Hot!Change public IP for IPSec connection

Author
dreamerkan
New Member
  • Total Posts : 7
  • Scores: 0
  • Reward points: 0
  • Joined: 2011/08/03 19:16:00
  • Status: offline
2018/07/25 01:50:52 (permalink)
0

Change public IP for IPSec connection

We are using Forgitate 60.
 
We have formed a IPSec VPN and no problem all the time. The VPN is using the public IP which is setup for the firewall for connection. We have 5 public IP on hand.
 
Recently, the public IP we are using is blocked due to the IPSec VPN activities. Thus, I am thinking if it is possible to change the public IP for IPSec VPN Connection without changing the public IP for the firewall?
 
Could someone help me on this issue?
 
Ivan 
#1

3 Replies Related Threads

    Fullmoon
    Platinum Member
    • Total Posts : 783
    • Scores: 7
    • Reward points: 0
    • Joined: 2010/08/02 18:02:10
    • Status: offline
    Re: Change public IP for IPSec connection 2018/07/25 03:28:53 (permalink)
    5 (1)
    have you tried to define secondary ip on WANx interface?

    Fortigate Newbie
    #2
    ede_pfau
    Expert Member
    • Total Posts : 5625
    • Scores: 382
    • Reward points: 0
    • Joined: 2004/03/09 01:20:18
    • Location: Heidelberg, Germany
    • Status: offline
    Re: Change public IP for IPSec connection 2018/07/25 05:13:28 (permalink)
    5 (1)
    hi,
     
    this is a 2-step process:
    - define a secondary IP address on the WAN port
    - specify this address in phase1 of the VPN
     
    see here: https://forum.fortinet.com/tm.aspx?m=118110

    Ede

    " Kernel panic: Aiee, killing interrupt handler!"
    #3
    dreamerkan
    New Member
    • Total Posts : 7
    • Scores: 0
    • Reward points: 0
    • Joined: 2011/08/03 19:16:00
    • Status: offline
    Re: Change public IP for IPSec connection 2018/07/26 21:35:46 (permalink)
    0
    Thx!
     
    Ivan
    #4
    Jump to:
    © 2018 APG vNext Commercial Version 5.5