Hot!Is No manual definition update via GUI in 6.0?

Author
ldti
New Member
  • Total Posts : 2
  • Scores: 0
  • Reward points: 0
  • Joined: 2018/06/22 05:21:15
  • Status: offline
2018/06/22 05:22:23 (permalink)
0

Is No manual definition update via GUI in 6.0?

I Can't find the button that used to be there...
#1

4 Replies Related Threads

    Jordan_Thompson_FTNT
    optimizzz
    • Total Posts : 465
    • Scores: 16
    • Reward points: 0
    • Joined: 2011/10/17 21:30:20
    • Location: Canada
    • Status: offline
    Re: Is No manual definition update via GUI in 6.0? 2018/06/25 01:28:07 (permalink)
    0
    Can you share a screen capture of the FortiGuard page? Which build are you using? And which signatures are you not able to update?
    #2
    ldti
    New Member
    • Total Posts : 2
    • Scores: 0
    • Reward points: 0
    • Joined: 2018/06/22 05:21:15
    • Status: offline
    Re: Is No manual definition update via GUI in 6.0? 2018/06/25 01:30:53 (permalink)
    0
    Attached screen shot.
    Version 6.0.1
    As you can see, there's no upload button.

    Attached Image(s)

    #3
    Jordan_Thompson_FTNT
    optimizzz
    • Total Posts : 465
    • Scores: 16
    • Reward points: 0
    • Joined: 2011/10/17 21:30:20
    • Location: Canada
    • Status: offline
    Re: Is No manual definition update via GUI in 6.0? 2018/06/26 00:10:54 (permalink)
    0
    The "upload" button is only shown if there is a license for that package. In the screen shot, each package is "Not Licensed".
    #4
    Cyrille.
    New Member
    • Total Posts : 1
    • Scores: 0
    • Reward points: 0
    • Joined: 2018/09/07 07:27:40
    • Status: offline
    Re: Is No manual definition update via GUI in 6.0? 2019/11/28 06:44:28 (permalink)
    0
    Partially true.
    Seems like effectively Licence enforcement changed between 5.6 and 6.0 somewhere.
    I have devices registered but without any licence.
     
    5.6 version allow manual upload of Database files (vsid/nids/iris/apdb can be)
    6.0 does not allow as you observe, requesting to "Renew Licence" only...
     
    Procedure to have an updated unit, or in case you need to restore a unit not having anymore Contract, but relying on Application Control or custom IPS configuration, being as follow:
     
    - Start with a 5.6 unit fresh Firmware
    - Manual upload of Database definition
    - Upgrade to 6.0 FortiOS manually
    - Restore 6.0 configuration
     
    #5
    Jump to:
    © 2019 APG vNext Commercial Version 5.5