Multiple time server values possible?

Steve_Fuller · ‎06-07-2018

Not finding any documentation for multiple hex values for times servers.

Markus · ‎06-11-2018

Yes, you can have multiple time servers, but you have to use cli https://forum.fortinet.com/tm.aspx?m=103705

Best

________________________________________________________
--- NSE 4 ---
________________________________________________________

Steve_Fuller · ‎06-11-2018

Let out the most important part, time servers within dhcp.

Dave_Hall · ‎06-11-2018

NTP server addresses to be handed out to dhcp clients are configured/setup under config system server entries. You can define up to 3 NTP servers by setting ntp-service specify then set values for ntp-server1, set ntp-server2, set ntp-server3, etc.

See https://docs.fortinet.com/uploaded/files/3950/fortigate-cli-ref-56.pdf#%5B%7B%22num%22%3A3446%2C%22g...

Steve Fuller wrote:
Let out the most important part, time servers within dhcp.

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C

ede_pfau · ‎06-11-2018

Those params are in 'config system dhcp server'.

Ede

"Kernel panic: Aiee, killing interrupt handler!"

Steve_Fuller · ‎06-11-2018

Not sure if the Shoretel phones will accept non-standard (not 04) time settings--will try. Thanks to all.