Hot!Restore configuration from Fortinet 60E to Fortinet 60D

Author
Fajar Julio Sarjono
New Member
  • Total Posts : 1
  • Scores: 0
  • Reward points: 0
  • Joined: 2018/06/05 21:57:20
  • Status: offline
2018/06/05 22:10:51 (permalink)
0

Restore configuration from Fortinet 60E to Fortinet 60D

Hi All,
 
I want ask, i have fortinet type 60E and i will restore the configuration backup to Fortinet 60D.
it will works or will be crashes?
 
Thank You
Regards,
Fajar
#1

3 Replies Related Threads

    mahesh secure
    Silver Member
    • Total Posts : 83
    • Scores: 1
    • Reward points: 0
    • Joined: 2015/12/10 01:04:48
    • Status: offline
    Re: Restore configuration from Fortinet 60E to Fortinet 60D 2018/06/07 02:51:38 (permalink)
    0
    Hi
     
    It will work. you need to put same os in fortigate 60D( if 60E is 5.4.6 then load the same in 60D).
    open 60E backup and replace the head 60E to 60D
     
    example:-
    #config-version=FGT60E-5.4-FW-build762-171212:opmode=0:vdom=
      to
    #config-version=FGT60D-5.4-FW-build762-171212:opmode=0:vdom=
     
    *note:- confirm both device have same number of interface
     
     
    Regards
    Mahesh
    #2
    uzair11
    New Member
    • Total Posts : 3
    • Scores: 0
    • Reward points: 0
    • Joined: 2019/03/18 06:07:35
    • Status: offline
    Re: Restore configuration from Fortinet 60E to Fortinet 60D 2019/03/18 06:13:00 (permalink)
    0
    Hi,
     
    Is it okay that Fortigate 60D configuration restore into 60E and then working fine.
     
     
    Thanks,
    Mohammad Uzair
    #3
    ede_pfau
    Expert Member
    • Total Posts : 6068
    • Scores: 488
    • Reward points: 0
    • Joined: 2004/03/09 01:20:18
    • Location: Heidelberg, Germany
    • Status: offline
    Re: Restore configuration from Fortinet 60E to Fortinet 60D 2019/03/18 08:02:08 (permalink)
    0
    For both OPs (hijacking is becoming a fashion lately...):
     
    no, you cannot just restore a config file from a different hardware.
    For a 60D to 60E, or vice versa, you will have to adjust the number and names of the ports. Apart from that the hardware is similar enough that a restore will go through. Remember to modify the file header as described.
     
    After the reboot, type in the CLI
    diag debug config read
     
    to get a list of configuration errors, if any.
     

    Ede

    " Kernel panic: Aiee, killing interrupt handler!"
    #4
    Jump to:
    © 2019 APG vNext Commercial Version 5.5