Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
pandacho
New Contributor

VPN between same subnet

Hi all

 

I am setting up a vpn for the first time between a fortinet and anther device.

 

the subnet at both ends are the same, so I am wondering what I need to do to get around any conflicts which would occur when I join the 2 (or do I need to change one f them to a different subnet?

2 REPLIES 2
Markus
Valued Contributor

Hi Pandacho

 

It's possible to have overlapping subnets, but the configuration is a bit more complicated and personally I don't like this "hack". If you have the ability to change the subnets, in my opinion, I would do it. Otherwise check this http://cookbook.fortinet.com/vpn-overlapping-subnets/ Good luck


________________________________________________________
--- NSE 4 ---
________________________________________________________

________________________________________________________--- NSE 4 ---________________________________________________________
Phinestra200
New Contributor III

Hi,

same subnet both side for vpn interconnexion it's never a good idea and may cause issue in phase 2 of your VPN.

According to what you say, you can perfom a source NAT of this subnet one side and use this new NAT pool or NAT address in the encryption domain.

Phi.

 

Labels
Top Kudoed Authors