OSPF in ADVPN FortiOS 5.6.2

[dimix]

Hi all!

FortiGate 100E FortiOS 5.6.2

FortiGate 60E FortiOS 5.6.2

Does ADVPN support a dynamic routing via OSPF?

Sorry for my English.

[Iescudero]

Hi there! Yes it does.

Here's a example with RIP:

http://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-ipsecvpn-54/ADVPN/Config_Overview.htm

in the same document you can find: "...RIP (for simplicity, you could use OSPF or BGP) is then configured to run on the IPsec..."

Hope it helps!

[Iescudero]

The same document for FortiOs 5.6:

http://help.fortinet.com/fos50hlp/56/Content/FortiOS/fortigate-ipsecvpn/ADVPN/Config_Overview.htm?Hi...

[dimix]

I saw the document for FortiOS 5.4, which indicates support only BGP or RIP for ADPVN. So in 5.6 ADVPN support BGP and OSPF dynamic routes?

[Iescudero]

I didn't find any example with ospf, but if I believe in the previous documents wich says that should work.

Here is an example with bgp:

http://cookbook.fortinet.com/configuring-advpn-in-fortios-5-4-dynamic-hub-and-spoke-vpns/

http://cookbook.fortinet.com/configuring-advpn-fortios-5-4-redundant-hubs-expert/

http://kb.fortinet.com/kb/viewAttachment.do?attachID=FortiOS_ADVPN_version_2017-09-14.pdf&documentID...

Cyas!

[dimix]

http://docplayer.net/48030709-Fortinet-auto-discovery-vpn-advpn.html

Slide №13

Dynamic Routing:

- BGP and RIPv2/RIPng are supported - OSPF, IS-IS and PIM are not supported

FortiOS 5.4

[neonbit]

Yup, currently it supports iBGP and RIPv2/RIPnp so OSPF is not supported. Hopefully this changes in 6.0.

[alex_buric]

Dynamic Routing: - BGP and RIPv2/RIPng are supported - PIM/Multicast is supported as of FortiOS 5.6.1 - OSPF and IS-IS are not supported